Tags

This is the 4.9.208 stable release

This is the 4.4.208 stable release

media updates for v5.5-rc5

amd-drm-fixes-5.5-2020-01-01:

amdgpu:
- ATPX regression fix
- SMU metrics table locking fixes
- gfxoff fix for raven
- RLC firmware loading stability fix

This is the 5.4.7 stable release

This is the 4.19.92 stable release

This is the 4.14.161 stable release

phy: for 5.5-rc

*) Fix error path in cpcap-usb driver when no host driver is loaded to
   avoid debug serial console from stop working
*) Fix to let USB host idle before switching to UART mode in cpcap-usb
   driver in order to avoid flakey enumeration next time
*) Prevent USB line glitches from waking up modem by enabling the USB
   lines (GPIO mux) after configuring the cpcap-usb PHY
*) Improve host vs docked mode detection in cpcap-usb PHY driver to keep
   VBUS enabled in host mode
*) Fix to prevent cpcap-usb PHY driver from enabling the PHY twice
*) Increase PHY ready timeout in qcom-qmp PHY as it takes more than 1ms
   to initialize
*) Round clock rate down to closest 1000 Hz in phy-rockchip-inno-hdmi to
   prevent wrong pixel clock to be used and result in no-signal when
   configuring a mode on RK3328

Linux 5.5-rc4

Power management fixes for 5.5-rc4

Fix compile test of the Tegra devfreq driver (Arnd Bergmann)
and remove redundant Kconfig dependencies from multiple devfreq
drivers (Leonard Crestez).

"LE.UM.3.3.1.c1-02100-qcs405.0"

Linux 5.5-rc3

This is the 5.4.6 stable release

This is the 4.19.91 stable release

This is the 4.14.160 stable release

This is the 4.9.207 stable release

This is the 4.4.207 stable release

Devicetree fix for 5.5-rc take 2:

- Add missing 'properties' keyword enclosing 'snps,tso' in snps,dwmac
  binding

wireless-drivers-next patches for v5.6

First set of patches for v5.6. The biggest thing here is of course the
new driver ath11k but also new features for other drivers as well a
myriad of bug fixes.

Major changes:

ath11k

* a new driver for Qualcomm Wi-Fi 6 (IEEE 802.11ax) devices

ath10k

* significant improvements on receive throughput and firmware download
  with SDIO bus

* report signal strength for each chain also on SDIO

* set max mtu to 1500 on SDIO devices

brcmfmac

* add support for BCM4359 SDIO chipset

wil6210

* support set_multicast_to_unicast cfg80211 operation

* support set_cqm_rssi_config cfg80211 operation

wcn36xx

* disable HW_CONNECTION_MONITOR as firmware is buggy

This is the 3.16.80 stable release