-
drm-fixes-for-4.8-rc6
drm fixes for 4.8-rc6 i915, vc4 and atmel.
-
pm-4.8-rc777893577 · ·
Power management fix for v4.8-rc7 More annotations of tracepoints in the runtime PM framework to prevent RCU from complaining when that code is invoked from the idle path (Paul McKenney).
-
mac80211-next-for-davem-2016-09-16fbd05e4a · ·
This time we have various things - all across the board: * MU-MIMO sniffer support in mac80211 * a create_singlethread_workqueue() cleanup * interface dump filtering that was documented but not implemented * support for the new radiotap timestamp field * send delBA in two unexpected conditions (as required by the spec) * connect keys cleanups - allow only WEP with index 0-3 * per-station aggregation limit to work around broken APs * debugfs improvement for the integrated codel algorithm and various other small improvements and cleanups.
-
mac80211-for-davem-2016-09-1685d5313e · ·
Two more fixes: * reject aggregation sessions for TSID/TID 8-16 that we can never use anyway and which could confuse drivers * check return value of skb_linearize()
-
-
wireless-drivers-next-for-davem-2016-09-15b7450e24 · ·
wireless-drivers-next patches for 4.9 Major changes: iwlwifi * preparation for new a000 HW continues * some DQA improvements * add support for GMAC * add support for 9460, 9270 and 9170 series mwifiex * support random MAC address for scanning * add HT aggregation support for adhoc mode * add custom regulatory domain support * add manufacturing mode support via nl80211 testmode interface bcma * support BCM53573 series of wireless SoCs bitfield.h * add FIELD_PREP() and FIELD_GET() macros mt7601u * convert to use the new bitfield.h macros brcmfmac * add support for bcm4339 chip with modalias sdio:c00v02D0d4339 ath10k * add nl80211 testmode support for 10.4 firmware * hide kernel addresses from logs using %pK format specifier * implement NAPI support * enable peer stats by default ath9k * use ieee80211_tx_status_noskb where possible wil6210 * extract firmware capabilities from the firmware file ath6kl * enable firmware crash dumps on the AR6004 ath-current is also merged to fix a conflict in ath10k.
-
phy-for-4.9-updated_v1cb9850d0 · ·
phy: for 4.9 (with extcon merge resolution) updated tag for 4.9 based on usb-next along with extcon merge resolution phy updates includes: *) phy driver for USB 3.0 PHY on Northstar *) phy driver for Rockchip usb2phy *) phy driver for the Rockchip SoC internal PCIe PHY *) phy driver for USB Type-C PHY on rk3399 *) phy_reset() API *) support for Allwinner A64 usb phy, usb2 phy in r8a7796 *) Fixes in twl4030-usb, tegra phy, sun4i-usb phy, da8xx-usb phy and omap-usb2 phy *) other misc cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
phy-for-4.9-resolved_v1cb9850d0 · ·
phy: for 4.9 (with extcon merge resolution) updated tag for 4.9 based on usb-next along with extcon merge resolution phy updates includes: *) phy driver for USB 3.0 PHY on Northstar *) phy driver for Rockchip usb2phy *) phy driver for the Rockchip SoC internal PCIe PHY *) phy driver for USB Type-C PHY on rk3399 *) phy_reset() API *) support for Allwinner A64 usb phy, usb2 phy in r8a7796 *) Fixes in twl4030-usb, tegra phy, sun4i-usb phy, da8xx-usb phy and omap-usb2 phy *) other misc cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
-
phy-for-4.9b78ea84a · ·
phy: for 4.9 *) phy driver for USB 3.0 PHY on Northstar *) phy driver for Rockchip usb2phy *) phy driver for the Rockchip SoC internal PCIe PHY *) phy driver for USB Type-C PHY on rk3399 *) phy_reset() API *) support for Allwinner A64 usb phy, usb2 phy in r8a7796 *) Fixes in twl4030-usb, tegra phy, sun4i-usb phy, da8xx-usb phy and omap-usb2 phy *) other misc cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-
mac80211-for-davem-2016-09-13ad5987b4 · ·
A few more fixes: * better mesh path fixing, from Thomas * fix TIM IE recalculation after sending frames to a sleeping station, from Felix * fix sequence number assignment while sending frames to a sleeping station, also from Felix * validate number of probe response CSA counter offsets, fixing a copy/paste bug (from myself)
-
iio-for-4.9b1696566f · ·
Second set of iio new device support, features and cleanups for the 4.9 cycle. New device support * ad8801 dac - new driver supporting ad8801 and ad8803 DACs. * adc12138 - new driver supporting TI adc12130/adc12132 and adc12138 ADCs. * ltc2485 adc - new driver * mxc6255 - add support for the mxc6225 part name and fixup the ID check so it works. * vz89x VOC sensor - add support for the vz89te part which drops the voc_short channel and adds CRCs compared to other supported parts. New features * core - immutable triggers. These effectively grant exclusive control over a trigger. The typical usecase is a device representing an analog part (perhaps a MUX) that needs to control the sampling of a downstream ADC. - resource managed trigger registration and triggered_buffer_init. - iio_push_event now protected against case of the event interface registration not having yet occured. Only matters if an interrupt can occur during this window - might happen on shared interrupt lines. - helper to let a driver query if the trigger it is using is provided by itself (using the convention of both device and trigger having the same parent). * tools - iio-utils. Used channel modifier scaling in preference to generic scaling when both exist. * at91-adc - Add support for touchscreen switches closure time needed by some newer parts. * stx104 - support the ADC channels on this ADC/DAC board. As these are the primary feature of the board also move the driver to the iio/adc directory. * sx9500 - device tree bindings. Cleanups / Fixes * ad5755 - fix an off-by-one on devnr limit check (introduced earlier this cycle) * ad7266 - drop NULL check on devm_regulator_get_optional as it can't return NULL. * ak8974 - avoid an unused functional warning due to rework in PM core code. - remove .owner field setting as done by i2c_core. * ina2xx - clear out a left over debug field from chip global data. * hid-sensors - avoid an unused functional warning due to rework in PM core code. * maxim-thermocouple - fix non static symbol warnings. * ms5611 - fetch and enable regulators unconditionally when they aren't optional. * sca3000 - whitespace cleanup. * st_sensors - fetch and enable regulators unconditionally rather than having them supported as optional regulators (missunderstanding on my part amongst others a while back) - followup to previous patch fixes error checking on the regulators. - mark symbols static where possible. - use the 'is it my trigger' help function. This prevents the odd case of another device triggering from the st-sensors trigger whilst the st-sensors trigger is itself not using it but rather using say an hrtimer. * ti-ads1015 - add missing of_node_put. * vz89x - rework to all support of new devices. - prevent reading of a corrupted buffer. - fixup a return value of 0/1 in a bool returning function. Address updates - Vlad Dogaru email address change. -
sunxi-config64-for-4.9d229d205 · ·
Allwinner ARM64 Kconfig changes Select the pinctrl driver in kconfig
-
sunxi-core-for-4.9c1efda12 · ·
Allwinner core changes for 4.9 Add support for big endian on the Allwinner A20, and the Nextthing GR8 SoC