Tags

This is the 3.10.63 stable release

ASoC: Merge window fixes for v3.19

A smattering of driver specific fixes here, some more cleanup of the
Exynos7 and Intel ACPI support plus a fix for register cache sync on the
pcm512x driver which has been lurking for a while.

This is the bulk of GPIO changes for the v3.19 series:

- A new API that allows setting more than one GPIO at the
  time. This is implemented for the new descriptor-based
  API only and makes it possible to e.g. toggle a clock and
  data line at the same time, if the hardware can do this
  with a single register write. Both consumers and drivers
  need new calls, and the core will fall back to driving
  individual lines where needed. Implemented for the MPC8xxx
  driver initially.
- Patched the mdio-mux-gpio and the serial mctrl driver
  that drives modems to use the new multiple-setting API
  to set several signals simultaneously.
- Get rid of the global GPIO descriptor array, and instead
  allocate descriptors dynamically for each GPIO on a certain
  GPIO chip. This moves us closer to getting rid of the
  limitation of using the global, static GPIO numberspace.
- New driver and device tree bindings for 74xx ICs.
- New driver and device tree bindings for the VF610 Vybrid.
- Support the RCAR r8a7793 and r8a7794.
- Guidelines for GPIO device tree bindings trying to get
  things a bit more strict with the advent of combined
  device properties.
- Suspend/resume support for the MVEBU driver.
- A slew of minor fixes and improvements.

This is the 3.2.65 stable release

This is the 2.6.32.65 stable release

IOMMU Updates for Linux v3.19

This time with:

	* A new IOMMU-API call: iommu_map_sg() to map multiple
	  non-contiguous pages into an IO address space with only one
	  API call. This allows certain optimizations in the IOMMU
	  driver.

	* DMAR device hotplug in the Intel VT-d driver. It is now
	  possible to hotplug the IOMMU itself.

	* A new IOMMU driver for the Rockchip ARM platform.

	* Couple of cleanups and improvements in the OMAP IOMMU driver.

	* Nesting support for the ARM-SMMU driver.

	* Various other small cleanups and improvements.

Please note that this time some branches were also pulled into other
trees, like the DRI and the Tegra tree. The VT-d branch was also pulled
into tip/x86/apic.
Some patches for the AMD IOMMUv2 driver are not in the IOMMU tree but
were merged by Andrew (or finally ended up in the DRI tree).

qcomlt-v3.18 20141212

This is the 3.12.35 stable release

media updates for v3.19-rc1

This is the bulk of GPIO changes for the v3.19 series:

- A new API that allows setting more than one GPIO at the
  time. This is implemented for the new descriptor-based
  API only and makes it possible to e.g. toggle a clock and
  data line at the same time, if the hardware can do this
  with a single register write. Both consumers and drivers
  need new calls, and the core will fall back to driving
  individual lines where needed. Implemented for the MPC8xxx
  driver initially.
- Patched the mdio-mux-gpio and the serial mctrl driver
  that drives modems to use the new multiple-setting API
  to set several signals simultaneously.
- Get rid of the global GPIO descriptor array, and instead
  allocate descriptors dynamically for each GPIO on a certain
  GPIO chip. This moves us closer to getting rid of the
  limitation of using the global, static GPIO numberspace.
- New driver and device tree bindings for 74xx ICs.
- New driver and device tree bindings for the VF610 Vybrid.
- Support the RCAR r8a7793 and r8a7794.
- Guidelines for GPIO device tree bindings trying to get
  things a bit more strict with the advent of combined
  device properties.
- Suspend/resume support for the MVEBU driver.
- A slew of minor fixes and improvements.

ASoC: Updates for v3.19

Lots and lots of changes this time around, the usual set of driver
updates and a huge bulk of cleanups from Lars-Peter.  Probably the most
interesting thing for most users is the Intel driver updates which will
(with some more machine integration work) enable support for newer x86
laptops.

 - Conversion of AC'97 drivers to use regmap, bringing us closer to the
   removal of the ASoC level I/O code.
 - Clean up a lot of old drivers that were open coding things that have
   subsequently been implemented in the core.
 - Some DAPM performance improvements.
 - Removal of the now seldom used CODEC mutex.
 - Lots of updates for the newer Intel SoC support, including support
   for the DSP and some Cherrytrail and Braswell machine drivers.
 - Support for Samsung boards using rt5631 as the CODEC.
 - Removal of the obsolete AFEB9260 machine driver.
 - Driver support for the TI TS3A227E headset driver used in some
   Chrombeooks.

Linux 3.18

This is the 3.17.6 stable release

This is the 3.17.5 stable release

This is the 3.14.26 stable release

This is the 3.10.62 stable release

- dual-dsi enabling from Gaurav with prep work from Jani
- reshuffling the ring init code to move towards a clean sw/hw state setup split
- ring free space refactoring from Dave Gordon
- s/seqno/request/ rework from John Harrison
- psr support for vlv/chv from Rodrigo
- skl mmio flip support from Damien
- and the usual bits&pieces all over