Tags

Linux 3.17-rc1

ASoC: Fixes for v3.17

Nothing too exciting here, a bunch of driver fixes that came along since
the initial pull request but none that really stand our and a warning
fix in the core.

More ACPI and power management updates for 3.17-rc1

 - Fix for an ACPI-based device hotplug regression introduced in 3.14
   that causes a kernel panic to trigger when memory hot-remove is
   attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen.

 - Fix for a cpufreq regression introduced in 3.16 that triggers a
   "sleeping function called from invalid context" bug in
   dev_pm_opp_init_cpufreq_table() from Stephen Boyd.

 - ACPI battery driver fix for a warning message added in 3.16 that
   prints silly stuff sometimes from Mariusz Ceier.

 - Hibernation fix for safer handling of mismatches in the 820 memory
   map between the configurations during image creation and during
   the subsequent restore from Chun-Yi Lee.

 - ACPI processor driver fix to handle CPU hotplug notifications
   correctly during system suspend/resume from Lan Tianyu.

 - Series of four cpuidle menu governor cleanups that also should
   speed it up a bit from Mel Gorman.

 - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
   cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann
   and Uwe Kleine-König.

 - Version 3.0 of the analyze_suspend.py suspend profiling tool
   from Todd E Brandt.

/

This is the 3.16.1 stable release

This is the 3.15.10 stable release

This is the 3.14.17 stable release

This is the 3.10.53 stable release

This is the 3.4.103 stable release

VFIO updates for v3.17-rc1
 - Enable support for bus reset on device release
 - Fixes for EEH support

- Setting dp M2/N2 values plus state checker support (Vandana Kannan)
- chv power well support (Ville)
- DP training pattern 3 support for chv (Ville)
- cleanup of the hsw/bdw ddi pll code, prep work for skl (Damien)
- dsi video burst mode support (Shobhit)
- piles of other chv fixes all over (Ville et. al.)
- cleanup of the ddi translation tables setup code (Damien)
- 180 deg rotation support (Ville & Sonika Jindal)

This is the bulk of GPIO changes for the v3.17 development
cycle, and this time we got a lot of action going on and
it will continue:

- The core GPIO library implementation has been split up in
  three different files:
  - gpiolib.c for the latest and greatest and shiny GPIO
    library code using GPIO descriptors only
  - gpiolib-legacy.c for the old integer number space API
    that we are phasing out gradually
  - gpiolib-sysfs.c for the sysfs interface that we are
    not entirely happy with, but has to live on for
    ABI compatibility

- Add a flags argument to *gpiod_get* functions, with some
  backward-compatibility macros to ease transitions. We
  should have had the flags there from the beginning it
  seems, now we need to clean up the mess. There is a plan
  on how to move forward here devised by Alexandre Courbot
  and Mark Brown.

- Split off a special <linux/gpio/machine.h> header for the
  board gpio table registration, as per example from the
  regulator subsystem.

- Start to kill off the return value from gpiochip_remove()
  by removing the __must_check attribute and removing all
  checks inside the drivers/gpio directory. The rationale
  is: well what were we supposed to do if there is an error
  code? Not much: print an error message. And gpiolib already
  does that. So make this function return void eventually.

- Some cleanups of hairy gpiolib code, make some functions
  not to be used outside the library private and make sure
  they are not exported, remove gpiod_lock/unlock_as_irq()
  as the existing function is for driver-internal use and
  fine as it is, delete gpio_ensure_requested() as it is
  not meaningful anymore.

- Support the GPIOF_ACTIVE_LOW flag from gpio_request_one()
  function calls, which is logical since this is already
  supported when referencing GPIOs from e.g. device trees.

- Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use
  the gpiolib irqchip helpers cutting down on GPIO irqchip
  boilerplate a bit more.

- New driver for the Zynq GPIO block.

- The usual incremental improvements around a bunch of
  drivers.

- Janitorial syntactic and semantic cleanups by Jingoo Han,
  and Rickard Strandqvist especially.

This is the 3.15.9 stable release

This is the 3.14.16 stable release

This is the 3.10.52 stable release

This is the 3.4.102 stable release

ACPI and power management updates for 3.17-rc1

 - ACPICA update to upstream version 20140724.  That includes
   ACPI 5.1 material (support for the _CCA and _DSD predefined names,
   changes related to the DMAR and PCCT tables and ARM support among
   other things) and cleanups related to using ACPICA's header files.
   A major part of it is related to acpidump and the core code used
   by that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
   Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

 - Radix trees for memory bitmaps used by the hibernation core from
   Joerg Roedel.

 - Support for waking up the system from suspend-to-idle (also known
   as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
   (Rafael J Wysocki).

 - Fixes for issues related to ACPI button events (Rafael J Wysocki).

 - New device ID for an ACPI-enumerated device included into the
   Wildcat Point PCH from Jie Yang.

 - ACPI video updates related to backlight handling from Hans de Goede
   and Linus Torvalds.

 - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
   and Graeme Gregory.

 - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

 - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
   (Rafael J Wysocki).

 - ACPI-based device hotplug cleanups from Wei Yongjun and
   Rafael J Wysocki.

 - Cleanups and improvements related to system suspend from
   Lan Tianyu, Randy Dunlap and Rafael J Wysocki.

 - ACPI battery cleanup from Wei Yongjun.

 - cpufreq core fixes from Viresh Kumar.

 - Elimination of a deadband effect from the cpufreq ondemand
   governor and intel_pstate driver cleanups from Stratos Karafotis.

 - 350MHz CPU support for the powernow-k6 cpufreq driver from
   Mikulas Patocka.

 - Fix for the imx6 cpufreq driver from Anson Huang.

 - cpuidle core and governor cleanups from Daniel Lezcano,
   Sandeep Tripathy and Mohammad Merajul Islam Molla.

 - Build fix for the big_little cpuidle driver from Sachin Kamat.

 - Configuration fix for the Operation Performance Points (OPP)
   framework from Mark Brown.

 - APM cleanup from Jean Delvare.

 - cpupower utility fixes and cleanups from Peter Senna Tschudin,
   Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.

/

This is the 3.2.62 stable release

Here are the PPC and ARM changes for KVM, which I separated because
they had small conflicts (respectively within KVM documentation,
and with 3.16-rc changes).  Since they were all within the subsystem,
I took care of them.

Stephen Rothwell reported some snags in PPC builds, but they are all
fixed now; the latest linux-next report was clean.

New features for ARM include:
- KVM VGIC v2 emulation on GICv3 hardware
- Big-Endian support for arm/arm64 (guest and host)
- Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)

And for PPC:
- Book3S: Good number of LE host fixes, enable HV on LE
- Book3S HV: Add in-guest debug support

This release drops support for KVM on the PPC440.  As a result, the
PPC merge removes more lines than it adds. :)

I also included an x86 change, since Davidlohr tied it to an independent
bug report and the reporter quickly provided a Tested-by; there was no
reason to wait for -rc2.