-
mac80211-for-davem-2018-10-041db58529 · ·
Just three small fixes: * fix use-after-free in regulatory code * fix rx-mgmt key flag in AP mode (mac80211) * fix wireless extensions compat code memory leak
-
-
iio-for-4.20b8911a43b · ·
Second set of IIO new device support features and cleanup for the 4.20 cycle. One merge commit in here to bring in the SPI_CS_WORD flag patches that are also going via the SPI tree. There are a few more fixes than normal for a pull targetting the next merge window. These are all long term issues and as we are late in the cycle, they can wait. New device support * ad7606 - Add support fo the ad7605-4 driver. This driver is still in staging but is heading in the right direction to graduate, motivated partly by the requirement for this device support. * ST VL53L0X ToF ranging sensor - New minimal driver. Interrupt support to follow. New features * SPI_CS_WORD optimization allows long transfers with the chip select toggled every 16bits. There is a software fallback as well to let drivers not care about whether the hardware supports it. * bh1750 - Device tree support and bindings. * ti-ads7950 - Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming the hardware supports it) Fixes and cleanups * ad5064 - Fix some long incorrect regulator error handling that preventing enabling the internal regulator. * ad7606 - The ad7606 doesn't actually have a 2.5V range and the values provided for scale have always been wrong. Fix them. - Drop some wrong kernel-doc (things that don't exist) - Add missing kernel-doc * at91-adc - Fixing missing ack of dataready on sysfs channel reads to avoid spurious interrupts. - Fix a wrong channel numbers in triggered_buffer_mode * hmc5843 - Fix incorrect part number in a comment. * imx25-gcq - Fix a device_node leak in an error path. * meson-saradc - Drop an unused and pointless define. - Use of_device_get_match_data instead of opencoding - Tidy up how meson_sar_adc_param is accessed. - Rework prior to adding some temperature sensor support. -
wireless-drivers-for-davem-2018-10-013baafeff · ·
wireless-drivers fixes for 4.19 First, and also hopefully the last, set of fixes for 4.19. All small but still important fixes mt76x0 * fix a bug when a virtual interface is removed multiple times b43 * fix DMA error related regression with proprietary firmware iwlwifi * fix an oops which was a regression in v4.19-rc1
-
phy-for-4.20566b3884 · ·
phy: for 4.20 *) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY *) Add new PHY driver for Rockchip HDMI PHY *) Add new PHY driver for Cadence display port PHY *) Add support for UFS PHY in Qualcomm's SDM845 SoC *) Add correct PHY init sequence for BCM63138 SATA PHY *) Add support for bringing the uart2 out through the usb dm+dp pin in Rockchips's rk3188 *) Re-design R-Car Gen3 USB PHY w.r.t support for OTG *) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY *) A preparation patch to remove the node name pointer from struct device_node *) Minor cleanups in some of the other PHY drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> -
phy_for_4.20566b3884 · ·
phy: for 4.20 *) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY *) Add new PHY driver for Rockchip HDMI PHY *) Add new PHY driver for Cadence display port PHY *) Add support for UFS PHY in Qualcomm's SDM845 SoC *) Add correct PHY init sequence for BCM63138 SATA PHY *) Add support for bringing the uart2 out through the usb dm+dp pin in Rockchips's rk3188 *) Re-design R-Car Gen3 USB PHY w.r.t support for OTG *) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY *) A preparation patch to remove the node name pointer from struct device_node *) Minor cleanups in some of the other PHY drivers. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> -
sunxi-clk-fixes-for-4.1980a6ec7d · ·
Allwinner clk fixes for 4.19 One fix for the Audio PLL that were not properly set and generating noise on the A10 SoCs.
-
sunxi-clk-for-4.208b2a3787 · ·
Allwinner clock changes for 4.20 Our usual set of changes for the Allwinner SoCs clock support. The most notable changes are: - A bunch of changes and fixes to support the A64 display engine - Some fixes to support the A83t display engine
-
sunxi-dt64-for-4.2067929449 · ·
Allwinner arm64 DT changes for 4.20 Our usual set of DT changes for the arm64 Allwinner SoCs. The most notable things are: - HDMI support on the A64 - New boards: OrangePi One Plus
-
sunxi-dt-for-4.2057a83c52 · ·
Allwinner DT changes for 4.20 Our usual bunch of DT patches for the Allwinner arm32 SoCs. The most notable changes are: - Support for the video decoding / encoding engine on the A10s/A13/A20/A33 - IR support for the A83t - SATA support for the R40 -
sunxi-drivers-for-4.2069a8c245 · ·
Allwinner drivers changes for 4.20 The H6 is now supported in our SRAM driver bindings, and we have a small Makefile change for the SRAM driver to build it without building the ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.
-
sunxi-config64-for-4.200570921c · ·
Allwinner arm64 config changes for 4.20 Here is a single config change to enable the DRM driver in the arm64 defconfig.
-
sunxi-h3-h5-for-4.206eeb4180 · ·
Allwinner H3 and H5 DT additions for 4.20 This is our usual H3/H5 pull request The most notable changes are: - the video decoding / encoding unit is finally enabled on the H3 - Mali support for the H5 - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support