Tags

Allwinner fixes for 4.14

Two fixes, one for the A31 DRM binding, and one for a missing regulator on
the pine MMC controller.

Allwinner DT changes for 4.15

The most notable changes are:
  - Conversion to the last SoC (A10, A20) to the new clock framework
  - HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
  - Support for the various power supplies on a number of boards
  - Fix of DTC warnings on a number of SoCs, but most of them still need
    some work
  - New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
    Banana Pi M2 Ultra

Allwinner core changes for 4.15

A bunch of patches for the sunxi documentation and mach-sunxi. The most
notable feature is the introduction of the R40 support.

Allwinner clock changes for 4.15

The most notable changes are:
  - Addition of sigma/delta modulation for the audio PLLs on the newer SoCs
  - A83t Display clocks supports

There's also a bunch of minor fixes that didn't have any impact on current
features provided by the kernel.

amdgpu, nouveau, i915 and exynos fixes

sound fixes for 4.14-rc6

We've got slightly more fixes than wished, but heading to a good
shape.  Most of changes are about HD-audio fixes, one for a buggy code
that went into 4.13, and another for avoiding a crash due to buggy
BIOS.

Apart from HD-audio, a sequencer core change that is only for UP
config (which must be pretty rare nowadays), and a USB-audio quirk as
usual.

Fix for stable:

- Fix DDI translation tables for BDW (Chris).

Critical fix:

- Fix GPU Hang on GVT (Changbin).

Other fixes:

- Fix eviction when GGTT is idle (Chris).
- CNL PLL fixes (Rodrigo).
- Fix pwrite into shmemfs (Chris).
- Mask bits for BXT and CHV L3 Workaround
  WaProgramL3SqcReg1Default (Oscar).

Fix for stable:

- Fix DDI translation tables for BDW (Chris).

Critical fix:

- Fix GPU Hang on GVT (Changbin).

Other fixes:

- Fix eviction when GGTT is idle (Chris).
- CNL PLL fixes (Rodrigo).
- Fix pwrite into shmemfs (Chris).
- Mask bits for BXT and CHV L3 Workaround
  WaProgramL3SqcReg1Default (Oscar).

Linaro 17.09

This is the 4.13.8 stable release

This is the 4.9.57 stable release

This is the 4.4.93 stable release

This is the 3.18.76 stable release

Linux 4.1.45

media fixes for v4.14-rc6

Just a single fix, for a WoWLAN-related part of CVE-2017-13080.

Quick 4.15 mist pull for the build fix:

Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
  outreachy applicants

Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry

Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
  Tsai)

Linux 4.14-rc5

Second set of IIO new device support, features and cleanup for 4.15

New device support
* cros_ec_accel_legacy
  - New driver for this older chromebook accelerometer.
* ds4422 dac driver
  - New driver and bindings for the Maxim ds4422 and ds4424 I2C DACs.
* kxcjk1013
  - Support the KXTF9 accelerometers.
* mcp320x
  - support mcp3550, mcp3551, mcp3553 21 bit ADCs.
* rfd77402
  - new driver for this laser range finder.
* st-sensors-accel
  - add support for the LIS2DW12 accelerometer with bindings
  - add support for the LIS3DHH accelerometer with bindings

New features
* core
  - Drop a duplicate forward declaration in iio.h
* Docs
  - add a clarification of the meaning of IIO_DISTANCE to reflect
    existing use in various range finding devices.
* st-sensors
  - add a register mask for the status register to correctly support
    2 channel devices.
  - decouple the irq1 and irq2 configuration parameters.
  - do not always write the enable_axis register as some newer devices
    are always on and don't support such configuration.
  - split open-drain control for irq1 and irq2
  - make sampling frequency control optional as non all hardware
    supports it.
* st-sensors-gyro
  - support 3 wire SPI mode
* st-sensors-magn
  - support 3 wire SPI mode
* st-sensors-pressure
  - support 3 wire SPI mode.

Cleanups and fixes
* ad7192
  - expand the buffer lock to cover device state protection rather than
    using core mlock to provide the state protection.
* ade7753
  - expand the buffer lock to cover device state protection as well
    rather than having an additional lock.
* dummy-evgen
  - Use the new irq_sim infrastructure rather than having our
    own local version of the same thing.
* hid-sensor-trigger
  - avoid touching sensors ever if user hasn't requested it.  This
    is a work around for one reported issue where turning a sensor
    off wasn't sufficient to make it actually switch off.  As we
    have only one report from what looks like buggy hardware we
    are sending this upstream the slow way.
* ina2xx
  - Adhere to the published ABI docs and use Ohms instead of
    microohms.  We don't think that anyone will notice this ABI fix
    but are sending it the slow route to reduce fallout if someone
    does!
* kxcjk1013 - refactors to support the KXTF9 being added.
  - Refactor ODR support.
  - Fix INT_CTRL/INT_SRC1 bit names to match the register name.
  - Extract code for reporting motion events as this isn't present
    on some parts to be supported.
  - Make the sysfs sampling_frequency_available stuff not a fixed
    string so as to allow for it to be chip type dependent.
  - Make the sampling frequency_available per type to match
    the sampling_frequency attributes.
* lsm6dsx - rework prior to new device support.
  - express the max fifo depth in 'scans' rather than bytes.
  - split control of the fifo mode fifo output data rate.
  - move decimator registers into the sensor_settings structure
    as this will make it easier to support devices that don't have
    this function.
  - add a fifo ops datastructure to allow for inter-part variations.
* max30100
  - fix i2c chip address in dt example
* max30102
  - use correct binding name for max30102 in example
* mma8452
  - Rename read/write event value callbacks to be more generic
    reflecting what they actually do now.
* rcar-gyroadc
  - pointer case to fix warnings when moving to 64 bit as this IP is
    present on new 64 bit SOCs
  - enable compile-testing to improve build coverage on this driver.
  - use the of_device_get_match_data helper instead of open coding
* sun4i-gpadc-iio
  - Register in the thermal framework after pm. Otherwise the IP is not
    enabled.
  - Don't fail probing if no thermal DT node is present.
* tsl2x7x
  - renaming tsl2x7x_settings to settings to avoid excessive line
    lengths.
  - Use IIO core to generate the integration_time sysfs attributes
    rather than hand rolling.
* vf6180
  - Move the range check on integration time to the setter function.
  - Refactor the code around integration time to be clearer including
    caching current integration time avoiding unnecessary chip reads.
  - cleanup the als_gain lookup avoiding reading registers on chip.
  - use rounded matching rather than precise values for als_gain
    lookup.
  - Correct the ALS  scale when non-default gain or integration time
    is used.

Second set of IIO fixes for the 4.14 cycle.

* ade7759
  - Fix a signed extension bug.
* as3935
  - The default noise and watch dog settings were such that the device
    was unusuable in most applications.  Add device tree parameters to
    allow it to be configured to something that will actually work.
* at91-sama5d2 adc
  - Fix handling of legacy device trees that don't provide the new
    trigger edge property.
* dln2-adc
  - Fix a missing Kconfig dependency on IIO_TRIGGERED_BUFFER.
* dummy driver
  - Add a missing break so that writing in_voltage0_thresh_rising_en
    doesn't always result in an error.
* zpa2326
  - Drop a test for an always true condition so that gcc won't spit out
    and unused variable warning.