Tags

sound fixes for 5.1

A few stable fixes at this round.
The USB Line6 audio fixes are a bit large, but they are rather trivial
and pretty much device-specific, so should be safe to apply at this
late stage.  Ditto for other HD-audio quirks.

This is the 5.0.11 stable release

This is the 4.19.38 stable release

This is the 4.14.115 stable release

This is the 4.9.172 stable release

ACPI fix for 5.1-rc8

Revert a recent ACPICA change that caused initialization to fail on
systems with Thunderbolt docking stations connected at the init time.

wireless-drivers fixes for 5.1

Third set of fixes for 5.1.

iwlwifi

* fix an oops when creating debugfs entries

* fix bug when trying to capture debugging info while in rfkill

* prevent potential uninitialized memory dumps into debugging logs

* fix some initialization parameters for AX210 devices

* fix an oops with non-MSIX devices

* fix an oops when we receive a packet with bogus lengths

* fix a bug that prevented 5350 devices from working

* fix a small merge damage from the previous series

mwifiex

* fig regression with resume on SDIO

ath10k

* fix locking problem with crashdump

* fix warnings during suspend and resume

Linux 5.1-rc7

This is the 5.0.10 stable release

This is the 4.19.37 stable release

This is the 4.14.114 stable release

This is the 4.9.171 stable release

This is the 4.4.179 stable release

This is the 3.18.139 stable release

Various updates, notably:
 * extended key ID support (from 802.11-2016)
 * per-STA TX power control support
 * mac80211 TX performance improvements
 * HE (802.11ax) updates
 * mesh link probing support
 * enhancements of multi-BSSID support (also related to HE)
 * OWE userspace processing support

GPIO fixes for the v5.1 kernel cycle:
- Fix a bug on the errorpath of gpiochip_add_data_with_key()
- IRQ type setting on the spreadtrum GPIO driver

 * fix use-after-free in mac80211 TXQs
 * fix RX STBC byte order
 * fix debugfs rename crashing due to ERR_PTR()
 * fix missing regulatory notification

Second set of IIO new device support, features and cleanup for the 5.2 cycle.

New device suport
* ad7606
  - Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
  - New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
  - Support the lsm6dsr, new device information structure and dt bindings.
* srf04
  - Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
    support of different required trigger pulse lengths.
* st-accel
  - Support the ls2de12, new device info and dt bindings.
* ti-ads8344
  - New driver for this 8 channel, 16 bit SPI ADC.

Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085

Cleanups and minor fixes / additions
* ad5758
  - Fixup for some changes between preproduction parts and final part.
* ad7606
  - Refactor handling of oversampling to make it easy to vary between
    supported devices.
* ad9832
  - Organise includes.
  - Clock framework to handle clocks.
* ad9834
  - Drop unnecessary parenthesis.
* bmc150
  - Use __func__ rather than hardcoding.
* dummy_evgen.
  - Fix a memleak on error in probe.
* kxcjk1013
  - Add KXCJ91008 ACPI ID as seen in the wild.
  - Use __func__ rather than hardcoding.
* imx7d
  - Local dev variable to simplify code a bit.
  - dev_err replaces pr_err to give more info.
  - devm_platform_ioremap_resource for small reduction in boilerplate.
  - Simplify probe and remove by sharing suspend / resume logic.
  - Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
  - Remove a variable that was never read.
  - Open code values where they are effectively described by what is assigned
    to them rather than using uninformative defines.
* max31856
  - Avoid an unintialized ret variable in a path that can't actually occur
    but is hard for a static checker to know.
* max9611
  - White space
* mpu3050
  - Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
  - Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
  - Fix missing dependencies.
* stm32-timer trigger
  - Fix a build issue when disabled.
* ti-ads7950
  - Fix mising dependency on CONFIG_GPIOLIB.

phy: for 5.2

  *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
     that can be used to undo the operation performed in xlate
  *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
     G12A SoC Family.
  *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
     one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
  *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
  *) Add new driver to support UFS M-PHY in MediaTek SoC
  *) Add new driver to support XUSB pad controller in Tegra186 SoCs
  *) Add new driver to support SERDES in TI's AM654 platform
  *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
     to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
  *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
  *) Add support for SERDES6G in phy-ocelot-serdes.c
  *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
  *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
  *) Add support to shut off regulators that power UFS during system suspend
  *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
     channel which helps to enable/disable interrupts for each instance
     independently
  *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
     PHY operates correctly over the entire temperature range.
  *) Use devm_clk_get_optional to get optional clocks instead of adding
     custom error checks

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Linux 5.1-rc6