Tags

This is the 3.16.59 stable release

wireless-drivers-next patches for 4.20

First set of new features for 4.20. mt76 driver is going through major
refactoring and that's why there are so many mt76 patches. iwlwifi is
also under heavy development and smaller changes to other drivers.

Also wireless-drivers was merged to fix a conflict between the two trees.

Major changes:

ath10k

* limit available channels via DT ieee80211-freq-limit

wil6210

* add 802.11r Fast Roaming support for AP and station modes

* add support for channel 4

iwlwifi

* new FW API handling

* some improvements in the PCI recovery mechanism

* enable a new scanning feature;

* continued work on HE (mostly radiotap)

* TKIP implementation in new devices

* work continues for new 22560 hardware

mt76

* add support for Alfa AWUS036ACM

* lots of refactoring to make it easier to add new hardware support

* prepare for adding mt76x0e (pci-e variant) support

* add CONFIG_MT76x0E kconfig symbol

brcmfmac

* add support CYW89342 mini-PCIe device

* add 4-way handshake offload detection for FT-802.1X

* enable NL80211_EXT_FEATURE_CQM_RSSI_LIST

* fix for proper support of 160MHz bandwidth

rtl8xxxu

* add rtl8188ctv support

Second set of IIO new device support features and cleanup for the 4.20 cycle.

One merge commit in here to bring in the SPI_CS_WORD flag patches
that are also going via the SPI tree.

There are a few more fixes than normal for a pull targetting the
next merge window.  These are all long term issues and as we are late
in the cycle, they can wait.

New device support
* ad7606
  - Add support fo the ad7605-4 driver.  This driver is still in staging
    but is heading in the right direction to graduate, motivated partly
    by the requirement for this device support.
* ST VL53L0X ToF ranging sensor
  - New minimal driver. Interrupt support to follow.

New features

* SPI_CS_WORD optimization allows long transfers with the chip select
  toggled every 16bits.   There is a software fallback as well to let
  drivers not care about whether the hardware supports it.

* bh1750
  - Device tree support and bindings.
* ti-ads7950
  - Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming
    the hardware supports it)

Fixes and cleanups

* ad5064
  - Fix some long incorrect regulator error handling that preventing
    enabling the internal regulator.
* ad7606
  - The ad7606 doesn't actually have a 2.5V range and the values provided
    for scale have always been wrong.  Fix them.
  - Drop some wrong kernel-doc (things that don't exist)
  - Add missing kernel-doc
* at91-adc
  - Fixing missing ack of dataready on sysfs channel reads to avoid spurious
    interrupts.
  - Fix a wrong channel numbers in triggered_buffer_mode
* hmc5843
  - Fix incorrect part number in a comment.
* imx25-gcq
  - Fix a device_node leak in an error path.
* meson-saradc
  - Drop an unused and pointless define.
  - Use of_device_get_match_data instead of opencoding
  - Tidy up how meson_sar_adc_param is accessed.
  - Rework prior to adding some temperature sensor support.

wireless-drivers fixes for 4.19

First, and also hopefully the last, set of fixes for 4.19. All small
but still important fixes

mt76x0

* fix a bug when a virtual interface is removed multiple times

b43

* fix DMA error related regression with proprietary firmware

iwlwifi

* fix an oops which was a regression in v4.19-rc1

phy: for 4.20

 *) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY
 *) Add new PHY driver for Rockchip HDMI PHY
 *) Add new PHY driver for Cadence display port PHY
 *) Add support for UFS PHY in Qualcomm's SDM845 SoC
 *) Add correct PHY init sequence for BCM63138 SATA PHY
 *) Add support for bringing the uart2 out through the usb dm+dp pin in
    Rockchips's rk3188
 *) Re-design R-Car Gen3 USB PHY w.r.t support for OTG
 *) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY
 *) A preparation patch to remove the node name pointer from struct device_node
 *) Minor cleanups in some of the other PHY drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

phy: for 4.20

 *) Add new PHY driver for Socionext PCIe, USB2 and USB3 PHY
 *) Add new PHY driver for Rockchip HDMI PHY
 *) Add new PHY driver for Cadence display port PHY
 *) Add support for UFS PHY in Qualcomm's SDM845 SoC
 *) Add correct PHY init sequence for BCM63138 SATA PHY
 *) Add support for bringing the uart2 out through the usb dm+dp pin in
    Rockchips's rk3188
 *) Re-design R-Car Gen3 USB PHY w.r.t support for OTG
 *) Cleanup Qualcomm's UFS PHY, QMP PHY (for PCIe and USB3) and QUSB2 PHY
 *) A preparation patch to remove the node name pointer from struct device_node
 *) Minor cleanups in some of the other PHY drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

This is the 4.19-rc6 release

Allwinner clk fixes for 4.19

One fix for the Audio PLL that were not properly set and generating noise
on the A10 SoCs.

Allwinner clock changes for 4.20

Our usual set of changes for the Allwinner SoCs clock support.

The most notable changes are:
  - A bunch of changes and fixes to support the A64 display engine
  - Some fixes to support the A83t display engine

Allwinner arm64 DT changes for 4.20

Our usual set of DT changes for the arm64 Allwinner SoCs.

The most notable things are:
  - HDMI support on the A64
  - New boards: OrangePi One Plus

Allwinner DT changes for 4.20

Our usual bunch of DT patches for the Allwinner arm32 SoCs.

The most notable changes are:
  - Support for the video decoding / encoding engine on the
    A10s/A13/A20/A33
  - IR support for the A83t
  - SATA support for the R40

Allwinner drivers changes for 4.20

The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.

Allwinner arm64 config changes for 4.20

Here is a single config change to enable the DRM driver in the arm64
defconfig.

Allwinner H3 and H5 DT additions for 4.20

This is our usual H3/H5 pull request

The most notable changes are:
  - the video decoding / encoding unit is finally enabled on the H3
  - Mali support for the H5
  - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support

Power management fix for 4.19-rc6

Fix incorrect __init and __exit annotations in the Qualcomm
Kryo cpufreq driver (Nathan Chancellor).

This is the 4.4.159 stable release

This is the 4.9.130 stable release

This is the 4.14.73 stable release

This is the 4.18.11 stable release