Tags

This is the 4.11.6 stable release

This is the 4.9.33 stable release

This is the 4.4.73 stable release

phy: for 4.13

 *) Group phy drivers into vendor specific directories
 *) Add USB3 PHY driver for Renesas R-Car Gen3
 *) Add USB2 PHY driver for Meson GXL and GXM SoCs
 *) Add USB DRD PHY driver for Broadcom Northstar2
 *) Add USB PHY driver for CPCAP PMIC USB
 *) Make phy-meson8b-usb2 driver support USB PHY on Meson8
 *) Make phy-tusb1210 driver support TUSB1211
 *) Make phy-rockchip-inno-usb2 driver support usb2-phy in rk3228 SoCs
 *) Make phy-brcm-sata driver support for stingray SATA phy
 *) Make bcm-ns-usb3 as a MDIO driver
 *) Make rockchip-inno-usb2 support two host ports
 *) Implement ->set_mode() callback in phy-tusb1210
 *) Minor fixes in phy drivers

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Here's just the fix for that ancient bug:
 * remove wext calling ndo_do_ioctl, since nobody needs
   that now and it makes the type change easier
 * use struct iwreq instead of struct ifreq almost everywhere
   in wireless extensions code
 * copy only struct iwreq from userspace in dev_ioctl for the
   wireless extensions, since it's smaller than struct ifreq

amd, i915, mgag200, msxfb, tegra fixes

Cross-subsystem Changes:
- dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas)
- dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun)

Core Changes:
- Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric)
- Trival fixes for dupe forward decl and reduce scope of variable (Dawid)

Driver Changes:
- dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose)
- vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric)
- panel: Add Innolux P079ZCA panel driver (Chris)
- panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas)
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun)
- zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes

Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Cc: Dawid Kurek <dawikur@gmail.com>

Driver Changes:
- dw-hdmi: Fix compilation error if REGMAP_MMIO not selected (Laurent)
- host1x: Fix incorrect return value (Christophe)
- tegra: Shore up idr API usage in tegra staging code (Dmitry)
- mgag200: Always use HiPri mode for G200e4v2 and limit max bandwidth (Mathieu)
- mxsfb: Ensure display can be lit up without bootloader initialization (Fabio)

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Mathieu Larouche <mathieu.larouche@matrox.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>

This is the 3.10.106 stable release

drm/i915 fixes for v4.12-rc6

Linux 4.1.41

ACPI fixes for v4.12-rc6

 - Revert a 4.11 ACPICA change that made assumptions which are not
   satisfied on some systems and caused the enumeration of resources
   to fail on them (Rafael Wysocki).

 - Add a mechanism to prevent tables from being unmapped prematurely
   due to reference counter overflows (Lv Zheng).

Power management fixes for v4.12-rc6

 - Revert a recent cpufreq schedutil governor change that caused some
   systems to behave undesirably (Rafael Wysocki).

 - Fix a cpufreq conservative governor issue introduced during the
   3.10 cycle that prevents it from working as expected in some
   situations (Tomasz Wilczyński).

 - Fix an error code path in the generic cpuidle driver for DT-based
   systems (Christophe Jaillet).

 - Fix three minor issues in devfreq drivers for Exynos (Arvind Yadav,
   Krzysztof Kozlowski).

sun4i-drm changes for 4.13

An unusually big pull request for this merge window, with three notable
features:
  - V3s display engine support. This is especially notable because it uses
    a different display engine used on the newer Allwinner SoCs (H3, A64
    and the likes) that will be quite easily supported now.
  - HDMI support for the old Allwinner SoCs. This is enabled only on the
    A10s for now, but should be really easy to extend to deal with A10, A20
    and A31
  - Preliminary work to deal with dual-pipeline SoCs (A10, A20, A31, H3,
    etc.). It currently ignores the second pipeline, but we can use the
    dual-pipelines bindings. This will be useful to enable the display
    pipeline while we work on the dual-pipeline.

Allwinner H5 DT changes for 4.13

Just like the H3, this is mostly about enabling the EMAC on the H5, and
also has a new board, the Orange Pi Zero Plus 2

Allwinner H3 changes for 4.13

This tag is about bringing the EMAC support to the H3 boards.

Allwinner fixes for 4.12

A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.

Allwinner arm64 DT changes for 4.13

Our usual arm64 changes. The most notable things are the EMAC support and
USB support enhancements. There's also support for the SoPine SoM, and the
OrangePi Win.

Allwinner DT changes for 4.13

The usual chunk of patches. The most notable improvements are the power
supplies improvements (battery and AC-IN), crypto support for the sun5i
family, HDMI support for the A10s, plus a lot of new things for the V3S and
the A83T.

Allwinner clock patches for 4.13

Some new clock units are supported, for the display clocks unsed in the
newer SoCs, and the A83T PRCM.

There is also a bunch of minor fixes for clocks that are not used by
anyone, and reworks needed by drivers that will land in 4.13.