Tags

Allwinner defconfig additions for 3.18

Nothing major, just a few drivers additions and misc options

Staging / IIO fixes for 3.17-rc6

Here are some IIO and Staging driver fixes for 3.17-rc6.  They are all
pretty simple, and resolve reported issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- bunch more i830M fixes from Ville
- full ppgtt now again enabled by default
- more ppgtt fixes from Michel Thierry and Chris Wilson
- plane config work from Gustavo Padovan
- spinlock clarifications
- piles of smaller improvements all over, as usual

sound fixes for 3.17-rc6

All small fixes in random various drivers, mostly for ASoC at this
time, which look reasonable for a high rc number.

This is the 3.16.3 stable release

This is the 3.14.19 stable release

This is the 3.10.55 stable release

regulator: Fixes for v3.17

Fix some leaked OF node references in regulator drivers that have been
left over following a fix on a fix to the reference counting.

Second round of new IIO drivers, features and cleanups for the 3.18 cycle.

New drivers and part support
* Bosch bmg160 Gyroscope driver
* Dyna-Image al3320a ambient light sensor driver
* Bosh bmi055 gyroscope part driver (accelerometer part supported by bmc150)
* isl29018 - add support for isl29023 and isl29035
* kxcjk-1013 - add support for kxcj9-1008 and kxtj2-1009
* bmc150 - additional part support (BMI055 accelerometer part, BMA255,
  BMA222E, BMA250E and BMA280).  Different resolutions but otherwise similar
  parts.
* bma180 - add BMA250 (note different from the BMA250E support above despite
  the naming).  A lot of driver reworking lead up to this - described below.

New features
* kxcjk1013 - add threshold event support.
* rockchip - document DT bindings.
* isl29018 - ACPI support
* bma180 - enable use without IRQ

Cleanups
* Tree wide - drop owner field assignment if using the module_platform_driver
  helper as that assigns it anyway.
* kxcjk1013 - drop a redundant assignment of the current range and fix a
  a defined but not used warning.
* inv_mpu6050 - Remove an unnecessary cast form a void pointer.
* rockchip - drop and unused variable.
* at91_adc - make a local function static.
* st-sensors-core - correctly handle an error in setting in
  st_sensors_set_drdy_int_pin
* isl29018 - typo fix
* bmc150 - fix incorrect scale value for 16G range (Driver new this cycle)
* bmc150 - fix issues when CONFIG_PM_RUNTIME not set (Driver new this cycle)
* ad7606 - line length tidy up.
* bmg160 - set power state only if PM_RUNTIME is defined.
* ak8975 - fix some unnecessary casting between char * and const char *
* bma180 - prefix remaining bits and bobs with bma180_ and ensure consistent.
         - use a bool instead of an int for state (as its either on or off).
         - expose the temperature channel
         - statically allocate buffers to avoid need for update_scan_mode
           callback.
         - refactor to allow futher chip variants including support for part
           specific config and disable code + different resolutions.

ASoC: Fixes for v3.17

This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific.  There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.

Linux 3.17-rc5

First round of IIO fixes for the 3.17 cycle.

* Fix an overwritten error return that can prevent deferred probing when
  using of_iio_channel_get_by_name
* A series that deals with an incorrect reference count when the default
  trigger is set within the main probe routine for a driver.  Can result
  in a double free if the trigger is changed.
* Fix a buglet with xilinx-xadc concerning setup of the address for an
  aux channel.
* At91 adc driver could sometimes get a touchscreen reading rather than
  the intended adc channel.  This is fixed by using the channel data register
  instead.
* Fix some ST magnetometer gain values that differ in production parts from
  the prerelease ones used for driver development.

This is the 3.2.63 stable release

IOMMU Fixes for Linux v3.17-rc4

Including:

	* Two fixes for issues found by Coverity
	* Various fixes for the ARM SMMU driver
	* A warning fix for the FSL PAMU driver

This time, I have some rate minstrel improvements, support for a very
small feature from CCX that Steinar reverse-engineered, dynamic ACK
timeout support, a number of changes for TDLS, early support for radio
resource measurement and many fixes. Also, I'm changing a number of
places to clear key memory when it's freed and Intel claims copyright
for code they developed.

misc fixes in PHY drivers

ACPI and power management fixes for 3.17-rc5

 - Fix for the cpufreq Operation Performance Points (OPP) code
   where a recent commit added a kcalloc() call with an incorrect
   ordering of arguments.  From Anand Moon.

 - Reverts of two ACPI battery commits that caused incorrect
   diagnostic information to be printed to dmesg in some cases
   from Bjørn Mork.

 - Fix for the ACPI RTC operation region handler that applied the
   & operator to an argument already representing an address and
   that caused it to overwrite its own argument instead of writing
   to the address contained in it as expected.  From Chun-Yi Lee.

 - Fix for the PM domain implementation in the ACPI LPSS (Low-Power
   Subsystem) driver where one callback pointer pointed to a wrong
   routine and one was NULL, but it shouldn't.  From Fu Zhonghui.

/