STM32

Devcontainer for stm32CubeIDE

Simple test project to use wiznet 5500 ethernet module with custom stm32 (but in this case smt32f407zg)

Simple code template to test is keyboard (button matrix) 4x4 works fine

Simple test project to check is diplay connected right

Raw supply, based on tranzistors, code

Raw code for supply with current and voltage regulation

Raw version of robohand controller, that recieves data from android device and controlls servos connected to pins

Simple STM32 Cube IDE project that blinks led when some data recieved in bluetooth HC-05 module

This project implements the FreeRTOS-IO for FreeRTOS-Plus-CLI, this is a port for stm32 mcu from the offical example.

CMake project with code examples for a Blue-Pill (STM32F103C8) using libopencm3 and FreeRTOS. Upload can be done by using st-flash from texane/stlink

CMake project with code examples for a Blue-Pill (STM32F103C8) using libopencm3. Upload can be done by using st-flash from texane/stlink

A Nes emulator for stm32 but can be ported to any other MCU :1

Real-time operating system for microcontrollers.

The STM32Cube hardware abstraction layer (HAL) and Low Layer APIs (LL) for STM32H7 family.

Run semihosting on STM32 MCU base on OpenOcd and GDB.

Running on STM32F429ZI from Discavery board.

Drivers for various 4.0" parallel port lcd display

A keyboard numpad and a calculator in the same box