hardware

A simple buffered mult module.

Bridge application to use with Openplanet Haptics plugin.

MPLAB XC compiler build containers.

All the noise.

A collection of custom KiCad footprints I use across projects.

A stereo mixer for Eurorack.

Adds a +5V rail to a eurorack power bus with standard 16-pin headers.

Design for a simple, passive output module which allows you to patch audio into a small speaker or a headphone jack and attenuate the volume. When the headphones are plugged in, the speaker is bypassed.

No buffering or gain.

Design for a Voltage Controlled Oscillator synthesizer module.

Design for a sequencer synthesizer module.

An open clone of this repo: https://gitlab.steamos.cloud/SteamDeck/hardware

Robotics, RISC-V, RPi, Arduino, ODBII, and IoT in general

A custom controller built with libopencm3, running on the Bluepill board.

A simple C-language library for interfacing with a Steam Controller in Linux.

Autonomous and modular system for network based information gathering and exploitation.

WEB interface here: https://antecursor.fr/

More info here: https://doc.antecursor.fr/

Python module to set and control Logitech G52 HOTAS/Joystick

Hardware Hacking Cheatsheet

Here you can find the all the hardware and software for both the legacy, current and development versions of the ESP32 Weathercloud Weather Station, which you can find here: https://www.instructables.com/ESP32-Weathercloud-Weather-Station/

A multi-purpose, hardware developer-oriented DIY PCB with buffered I/O expansion/extension and a breadboard/prototyping area, suited to all Sinclair ZX Spectrum models. For the ZX Next, it adds bus level-shifting and (de)inverting the BUSREQ line.

Experimental Phased Clock Generator (XPCG) is an Arduino Due application for controlling a phased array of clock signals via the 5P49V60 clock generator IC with per-channel delay control in the sub-1ns regime.