Tags

Power management updates for 5.6-rc1

 - Update the ACPI processor driver in order to export
   acpi_processor_evaluate_cst() to the code outside of it, add
   ACPI support to the intel_idle driver based on that and clean
   up that driver somewhat (Rafael Wysocki).

 - Add an admin guide document for the intel_idle driver (Rafael
   Wysocki).

 - Clean up cpuidle core and drivers, enable compilation testing
   for some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
   Wysocki, Yangtao Li).

 - Fix reference counting of OPP (operating performance points) table
   structures (Viresh Kumar).

 - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
   Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
   YueHaibing).

 - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
   power capping driver (Zhang Rui).

 - Update cpufreq drivers:

   * Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).

   * Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).

   * Fix cpufreq policy reference counting issues in s3c and
     brcmstb-avs (chenqiwu).

   * Fix ACPI table reference counting issue and HiSilicon quirk
     handling in the CPPC driver (Hanjun Guo).

   * Clean up spelling mistake in intel_pstate (Harry Pan).

   * Convert the kirkwood and tegra186 drivers to using
     devm_platform_ioremap_resource() (Yangtao Li).

 - Update devfreq core:

   * Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).

   * Clean up the handing of transition statistics and allow them
     to be reset by writing 0 to the 'trans_stat' devfreq device
     attribute in sysfs (Kamil Konieczny).

   * Add 'devfreq_summary' to debugfs (Chanwoo Choi).

   * Clean up kerneldoc comments and Kconfig indentation (Krzysztof
     Kozlowski, Randy Dunlap).

 - Update devfreq drivers:

   * Add dynamic scaling for the imx8m DDR controller and clean up
     imx8m-ddrc (Leonard Crestez, YueHaibing).

   * Fix DT node reference counting and nitialization error code path
     in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
     for it (Chanwoo Choi, Yangtao Li).

   * Fix DT node reference counting in rockchip-dfi and make it use
     devm_platform_ioremap_resource() (Yangtao Li).

   * Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).

   * Fix initialization error code paths in exynos-bus (Yangtao Li).

   * Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
     Kozlowski).

 - Add tracepoints for tracking usage_count updates unrelated to
   status changes in PM-runtime (Michał Mirosław).

 - Add sysfs attribute to control the "sync on suspend" behavior
   during system-wide suspend (Jonas Meurer).

 - Switch system-wide suspend tests over to 64-bit time (Alexandre
   Belloni).

 - Make wakeup sources statistics in debugfs cover deleted ones which
   used to be the case some time ago (zhuguangqing).

 - Clean up computations carried out during hibernation, update
   messages related to hibernation and fix a spelling mistake in one
   of them (Wen Yang, Luigi Semenzato, Colin Ian King).

 - Add mailmap entry for maintainer e-mail address that has not been
   functional for several years (Rafael Wysocki).

Linux 5.5

wireless-drivers-next patches for v5.6

Second set of patches for v5.6. Nothing special standing out, smaller
new features and fixes allover.

Major changes:

ar5523

* add support for SMCWUSBT-G2 USB device

iwlwifi

* support new versions of the FTM FW APIs

* support new version of the beacon template FW API

* print some extra information when the driver is loaded

rtw88

* support wowlan feature for 8822c

* add support for WIPHY_WOWLAN_NET_DETECT

brcmfmac

* add initial support for monitor mode

qtnfmac

* add module parameter to enable DFS offloading in firmware

* add support for STA HE rates

* add support for TWT responder and spatial reuse

This is the 5.4.15 stable release

amd-drm-fixes-5.5-2020-01-23:

amdgpu:
- remove the experimental flag from renoir

Power management fix for 5.5-rc8

Prevent the kernel from crashing during resume from hibernation
if free pages contain leftover data from the restore kernel and
init_on_free is set (Alexander Potapenko).

wireless-drivers fixes for v5.5

Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.

iwlwifi

* don't send the PPAG command when PPAG is disabled, since it can cause problems

* a few fixes for a HW bug

* a fix for RS offload;

* a fix for 3168 devices where the NVM tables where the wrong tables were being read

* fix a couple of potential memory leaks in TXQ code

* disable L0S states in all hardware since our hardware doesn't
 officially support them anymore (and older versions of the hardware
 had instability in these states)

* remove lar_disable parameter since it has been causing issues for
  some people who erroneously disable it

* force the debug monitor HW to stop also when debug is disabled,
  since it sometimes stays on and prevents low system power states

* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems

libertas

* fix two buffer overflows

mt76

* build fix related to CONFIG_MT76_LEDS

* fix off by one in bitrates handling

This is the 5.4.14 stable release

This is the 4.19.98 stable release

This is the 4.14.167 stable release

This is the 4.9.211 stable release

This is the 4.4.211 stable release

Linux 5.5-rc7

Second set of new device support, features and minor fixes for IIO in the 5.6 cycle

Just a small set this time.

As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release.  A short delay here will
do little harm.

New device support
* adis16480
  - Add support for adis16490. After earlier rework this is simple ID plus
    chip info.

Features
* kxcjk1013
  - mount matrix support.
* lsm_6dsx
  - mount matrix support.

Cleanups / minor or late breaking fixes
* ad7124
  - add support to ad-sigma-delta and use it in this driver to allow
    the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
    using this framework.
* adis
  - use delay structure now available in SPI to handle transfer delays
  - introduce a timeouts structure to allow support of new devices
* ak8975
  - drop platform data support.  No one is using it and it adds complexity.
  - use device_get_match_data rather than open coding much the same thing.
* dht11
  - drop meaningless todo
* at91-samad2_adc
  - switch to dma_request_chan
* altas-sensor
  - add a helper function to compute number of channels.  Needed for new device
    support that is under review.
* bma400
  - add a lower bound check on scale.
* inv_mpu6050
  - add support for temperature data in the fifos for all chips.
  - support an odd situation where a board supports only interrupt triggering
    on both edges.
* st_lsm6dsx
  - check and handle potential error return.
* st_sensors
  - fix some values for the LSM9DS0 which is ever so slightly different from
    other devices using the same whoami value.
  - switch over to generic functions from dt ones, avoiding need for separate
    ACPI support.
* stm32-adc
  - switch to dma_request_chan
  - suppress an error print in deferred probe case.
* stm32-dac
  - drop private data structure element for reset controller as only used in
    probe.
  - reflect more cleanly that the reset controller is optional whilst ensuring
    that if is specified any errors are caught.
* stm32-dfsdm
  - switch to dma_request_chan
  - fix missing application of formatting to single conversions.
  - ensure the sampling rate is updated when the oversampling ratio is changed.

USB driver fixes for 5.5-rc7

Here are some small USB driver and core fixes for 5.5-rc7

There's one fix for hub wakeup issues and a number of small usb-serial
driver fixes and device id updates.

The hub fix has been in linux-next for a while with no reported issues,
and the usb-serial ones have all passed 0-day with no problems.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

amd-drm-next-5.6-2020-01-17:

amdgpu:
- Fix 32 bit harder
- Powerplay cleanups
- VCN fixes for Arcturus
- RAS fixes
- eDP/DP fixes
- SR-IOV fixes
- Re-enable S/G display for PCO/RV2
- Free stolen memory after init on gmc10
- DF hashing optimizations for Arcturus
- Properly handle runtime pm in sysfs and debugfs
- Unify more GC programming between amdgpu and amdkfd
- Golden settings updates for gfx10
- GDDR6 training fixes
- Freesync fixes
- DSC fixes
- TMDS fixes
- Renoir USB-C fixes
- DC dml updates from hw team
- Pollock support
- Mutex init regresson fix

amdkfd:
- Unify more GC programming between amdgpu and amdkfd
- Use KIQ to setup HIQ rather than using MMIO

scheduler:
- Documentation fixes
- Improve job distribution with load sharing

drm:
- DP MST fix

This is the 5.4.13 stable release

This is the 4.19.97 stable release

This is the 4.14.166 stable release

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>