-
qcom-arm64-for-6.13d59187e · ·
Qualcomm ARM64 DTS updates for 6.1 Support for Samsung Galaxy E5, E7 and Grand Max is added, with support for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value Edition gains magnetometer support. MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs. On SA8295P ADP problems arising from regulators being switched into low-power mode is worked around by removing this ability, for now. The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC related updates are introduced. On SC7280 support for the CPU and LLC bwmon instances are introduced. Soundwire, audio codecs and sound introduced for a variety of boards. Using required-opps the USB controllers votes for a minimum corner on VDD_CX. The onboard USB Hub Herobrine is described. A new board, the Google Evoker is added, as is another revision of Herobrine Villager. On SC8280XP the USB controllers are marked as wakeup-sources, to keep them powered during suspend. The CRD has HID devices marked as wakeup-sources to enable resuming the system. In addition to these changes the alternative touchpad is introduced on the Lenovo ThinkPad X13s. SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350 interconnect providers and GPI DMA is introduced. A description of the PM7280b PMIC is added to Fairphone FP4 on SM7225. With the multi-MSI support added in the PCIe controller, SM8250 gets all its MSI interrupts added. UFS ICE and the second SDHCI controller is introduced on SM8450. Support for the Sony Xperia 1 IV is introduced. Throughout a variety of platforms the TCSR mutex syscon is replaced with the MMIO-based binding. TCSR nodes gained proper compatibles and halt syscon nodes are split out from the mutex ranges. A range of fixes to align with DT bindings are introduced. Among these are the changes to the follow the TLMM binding and suffix pinctrl states with -state and subnodes thereof with -pins, another is a number of changes transitioning to use -gpios and introduction of proper parent clock references in various clock providers.
-
qcom-dts-for-6.15cbd2016 · ·
Qualcomm ARM DTS updates for 6.1 This adds extends the IPQ8064 support with the two variants IPQ8062 and IPQ8065. MSM8974 and APQ8084 gained RPM stats support. The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS ZenWatch 2 and LG G Watch R. MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got the TMA340 Touchscreen described. A wide range of improvements are done throughout the DTS files to align with bindings, fix issues and improve structure on things.
-
qcom-drivers-for-6.1df646a17 · ·
Qualcomm driver updates for 6.1 The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth on SDM845 and SC7280. The LLCC driver is extended to provide per-platform register mappings to the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the passed qmi_elem_info to be const. Support for SDM845 is added to the sleep stats driver. Power-domains for the SM6375 platform is added to RPMPD and the platform is added to socinfo, together with the PM6125 pmic id. A couple of of_node reference issues are corrected in the smem state and smsm drivers. The Qualcomm SCM driver binding is converted to YAML.
-
qcom-defconfig-for-6.110fa117b · ·
Qualcomm ARM defconfig updates for 6.1 This enables command-db, ocmem, rpmh and rpmhpd drivers in the multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used across MSM8974, MSM8226, MSM8916 and APQ8084. Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
-
qcom-arm64-defconfig-for-6.125c7d385 · ·
Qualcomm ARM64 defconfig updates for 6.1 This enables core providers needed to boot SC8180X, sound drivers for SC7180 and SC7280, the Qualcomm EDP PHY, last-level cache controller driver, on-chip memory driver and the SPM driver.
-
qcom-arm64-fixes-for-6.040e95419 · ·
Qualcomm ARM64 DTS fixes for 6.0 This corrects invalid IOMMU streams for the SM8150 CDSP FastRPC, moves the wakeup-source of SC7280 USB nodes to the correct place, fixes the SM8350 UFS PHY serdes size to not overlap with the other subnodes and updates the firmware location for the Lenovo ThinkPad X13s to match the movement in linux-firmware. It also updates MAINTAINERS and .mailmap to reflect the changes in my email address.
-