-
sunxi-fixes-for-5.6-200cef5e4 · ·
Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6.
-
sunxi-dt-for-5.7048cdfce · ·
Allwinner Device Tree Changes for v5.7 A fairly large set of changes for v5.7, including some new devices. SoC specific changes: - SPI on H6 SoC enabled - Thermal sensor on R40 SoC enabled - Deinterlace core hardware on A64 SoC enabled - Redundant assigned-clocks properties removed - required clock rates are now enforced by drivers - LVDS panel support on A20 SoC enabled - PMU compatible fixed for H5 and H6 SoCs - Thermal trip points added for A83T and H5 SoCs - (Image) Rotation core hardware on A83T and A64 SoCs enabled Device specific changes: - Pine64 PineTab and PinePhone added - Various cleanups and improvements for Pine64 PineBook - GPIO pin bank regulator supplies added for A64-OlinXino - eMMC enabled on Orange Pi 3 - PocketBook Touch Lux 3 added - Linutronix Testbox v2 added - Ethernet enabled on Orange Pi One Plus - HDMI enabled on H6-based Orange Pi boards
-
sunxi-core-for-5.7614215c8 · ·
Allwinner Core Changes for v5.7 Just one change for our mach code for including the correct clk header.
-
sunxi-fixes-for-5.6d9b553b0 · ·
Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40
-
sunxi-clk-for-5.7b998b75f · ·
Allwinner Clock Changes for 5.7 Changes consist mainly of cleanups for the display engine clock driver, correcting clocks that don't exist. Also, the MBUS clock on the A64 is exported for the device tree to consume.
-
topic/mst-bw-check-fixes-for-airlied-2020-03-12-2047d4cd2 · ·
UAPI Changes: None Cross-subsystem Changes: None Core Changes: Fixed regressions introduced by commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check"), which would cause us to: * Calculate the available bandwidth on an MST topology incorrectly, and as a result reject most display configurations that would try to enable more then one sink on a topology * Occasionally expose MST connectors to userspace before finishing probing their PBN capabilities, resulting in us rejecting display configurations because we assumed briefly that no bandwidth was available Driver Changes: None
-
topic/mst-bw-check-fixes-for-airlied-2020-03-12-1047d4cd2 · ·
UAPI Changes: None Cross-subsystem Changes: None Core Changes: Fixed some issues introduced by commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check"), which caused the DP MST helpers to incorrectly reject display configurations in drm_dp_mst_atomic_check() as a result of miscalculating the available bandwidth. Additionally, another issue that was required for this to work was fixed where we would reject display configurations because we would accidentally expose MST connectors to userspace before having probed their available bandwidth. Driver Changes: None
-
amd-drm-fixes-5.6-2020-03-111d2686d4 · ·
amd-drm-fixes-5.6-2020-03-11: amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes
-
mac80211-for-net-2020-03-11ba32679c · ·
A couple of fixes: * three netlink validation fixes * a mesh path selection fix
-
amd-drm-next-5.7-2020-03-105d11e37c · ·
amd-drm-next-5.7-2020-03-10: amdgpu: - SR-IOV fixes - Fix up fallout from drm load/unload callback removal - Navi, renoir power management watermark fixes - Refactor smu parameter handling - Display FEC fixes - Display DCC fixes - HDCP fixes - Add support for USB-C PD firmware updates - Pollock detection fix - Rework compute ring priority handling - RAS fixes - Misc cleanups amdkfd: - Consolidate more gfx config details in amdgpu - Consolidate bo alloc flags - Improve code comments - SDMA MQD fixes - Misc cleanups gpu scheduler: - Add suport for modifying the sched list uapi: - Clarify comments about GEM_CREATE flags that are not used by userspace. The kernel driver has always prevented userspace from using these. They are only used internally in the kernel driver.