Tags

drm-fixes-5.3-2019-08-14:

amdgpu:
- Use kvalloc for dc_state to avoid allocation
  failures in some cases.
- Fix gfx9 soft recovery

scheduler:
- Fix a race condition when destroying entities

Devicetree fixes for 5.3:

- Fix building DT binding examples for in tree builds

- Correct some refcounting in adjust_local_phandle_references()

- Update FSL FEC binding with deprecated properties

- Schema fix in stm32 pinctrl

- Fix typo in of_irq_parse_one docbook comment

This is the 3.16.72 stable release

"LV.AU.0.0.1-11010-gen3meta.0"

First set of new device support, features and cleanups for IIO in the 5.4 cycle

Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver
support for l3c devices.  Done from immutable branch.

A counter subsystem patche in here as well.

Alongside the new device support (which is always good), Chuhong's work
on using devres managed APIs has cleaned up a number of drivers.

New device support
* adis16460
  - New driver based on ADIS framework which needed addition of support
    for cs_change_delay. Includes device tree binding.
* cros_ec
  - Support fo the veyron-minnie which uses an older interface.
* lsm6dsx
  - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly)
  - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!)
* Maxim 5432
  - New driver support MAX5432-MAX5435 family of potentiometers.
* noa1305
  - New driver for this ON Semiconductor Ambient light sensor.

Features and cleanups
* tree wide
  - Drop error prints after platform_get_irq as already prints errors
    internally if any occur.
* docs
  - Document mounting matrix.
  - Fix a missing newline at end of file.
* ad2s1210
  - Switch to device managed APIs for all of probe and drop explicit remove.
* ad7192
  - Add of_device_id array to explicity handling DT bindings.
* ad7606
  - Lots of rework leading to support for software configure modes in ad7616
    parts.
  - Debugfs register access support.
* am2315
  - Switch to device managed APIs for all of probe and drop explicit remove.
* apds9960
  - Typo in module description.
* cm36651
  - Convert to i2c_new_dummy_device.
  - Swithc to device managed APIs for all of probe adn drop explicit remove.
* cros_ec
  - Calibscale support for accel, gyro and magnetometer.
  - Tidy up some error codes to return the error from the stack rather than
    -EIO.
  - Determine protocol version.
  - Add a sign vector to the core to fix sensor rotation if necessary.
    Cannot just be done with mount matrix as already in use in many devices.
  - Tidy up INFO_SCALE being in both the separate and shared lists.
  - Drop a lot of dplicate code from the cros-ec-accel-legacy driver
    and use the core provided code instead.
  - Make frequency range available to userspace.
* counter / ftm-quaddec
  - Switch to device managed APIs for all of probe adn drop explicit remove.
* hdc100x
  - Switch to device managed APIs for all of probe and drop explicit remove.
* hi8435
  - Use gpiod_set_value_cansleep as we don't care here and there is a
    board out there where it needs to sleep.
  - Switch to device managed APIs for all of probe and drop explict remove.
* hp03
  - Convert to i2c_new_dummy_device.
* maxim thermocouple
  - Switch to device managed APIs for all of probe and drop explicit remove.
* mmc35240
  - Fix typo in constant naming.
* mpu6050
  - Use devm_add_action_or_reset in place of explicit error handling.
  - Make text in Kconfig more explicit about which parts are supported.
* mxc4005
  - Switch to device managed APIs for all of probe and drop explicit remove.
* pms7003
  - Convert device tree bindings to yaml.
  - Add a MAINTAINERS entry
* sc27xx
  - Introduce a local struct device *dev pointer to avoid lots of deref.
  - Use devm_add_action_or_reset in place of explicit error handling.
* sca3000
  - Typo fix in naming.
* si1145
  - Switch to device managed APIs for all of probe and drop explicit remove.
* st_sensors
  - Lots of rework to enable switch to regmap.
  - Regmap conversion at the end.
  - Tidy up some inconsistencies in buffer setup ops.
  - Tidy up an oddity by dropping get_irq_data_ready function in favour
    of direct access.
  - Stop allocating buffer in buffer enable in favour of just embedding
    a large enough constant size buffer in the iio_priv accessed structure.
* st_lsm6dsx
  - l3c device support (LSM6DSO and LSM6DSR)
  - tidy up irq return logic which was strangely written.
  - fix up an ABI quirk where this driver used separate scale
    attributes, even though they were always shared by type.
* stk33xx
  - Device tree bindings include manufacturer ID.
* stm32-adc
  - Add control for supply to analog switches including DT bindings.
* stm32 timer
  - Drop the quadrature mode support.  Believed there were no users so
    take this opportunity to drop this unwanted ABI.
* tsl2772
  - Switch to device mangage APIs for all of probe and drop explicit remove.
  - Use regulator_bulk_* APIs to reduce repitition.
* veml6070
  - Convert to i2c_new_dummy_device.

Second set of IIO fix for the 5.3 cycle.

* adf4371
  - Calculation of the value to program to control the output frequency
    was incorrect.
* max9611
  - Fix temperature reading in probe.  A recent fix for a wrong mask
    meant this code was looked at afresh.  A second bug became obvious
    in which the return value was used inplace of the desired register
    value.  This had no visible effect other than a communication test
    not actually testing the communications.

Linux 5.3-rc4

This is the 4.9.189 stable release

This is the 4.4.189 stable release

drm-next-5.4-2019-08-09:

Same as drm-next-5.4-2019-08-06, but with the
readq/writeq stuff fixed and 5.3-rc3 backmerged.

amdgpu:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- Enable mclk DPM for Navi
- Misc DC display fixes
- Add perfmon support for DF
- Add scatter/gather display support for Raven
- Improve SMU handling for GPU reset
- RAS support for GFX
- Drop last of drmP.h
- Add support for wiping memory on buffer release
- Allow cursor async updates for fb swaps
- Misc fixes and cleanups

amdkfd:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- CWSR trap handlers updates for gfx9, 10
- Drop last of drmP.h
- Update MAINTAINERS

radeon:
- Misc fixes and cleanups
- Make kexec more reliable by tearing down the GPU

ttm:
- Add release_notify callback

uapi:
- Add wipe memory on release flag for buffer creation

This is the 4.14.138 stable release

This is the 4.19.66 stable release

This is the 5.2.8 stable release

media updates for v5.3-rc1

Power management fix for 5.3-rc4

Revert a recent PCI power management change that caused problems to
occur on multiple systems (Mika Westerberg).

sound fixes for 5.3-rc4

Lots of small fixes at this time since we've received the ASoC
fix batch now.

- Some coverage in ASoC core mostly for minor issues like NULL
  checks for DPCM and proper error handling in DAI instantiation

- A collection of small device-specific changes in various ASoC
  codec and platform drivers

- OF-tree refcount fixes in a few ASoC drivers

- Fixes of memory leaks in the error paths of various ASoC / ALSA
  drivers

- A workaround for a long-standing issue on AMD HD-audio device

- Updates of MAINTAINERS, mail addresses, file permission fixups

drm-fixes-5.3-2019-08-07:

amdgpu:
- Fixes VCN to handle the latest navi10 firmware
- Fixes for fan control on navi10
- Properly handle SMU metrics table on navi10
- Fix a resume regression on Stoney

amdkfd:
- Revert new GWS ioctl.  It's not ready.

"LV.AU.0.0.2-00510-qtiquingvm.0"

drm-next-5.4-2019-08-06:

amdgpu:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- Enable mclk DPM for Navi
- Misc DC display fixes
- Add perfmon support for DF
- Add scatter/gather display support for Raven
- Improve SMU handling for GPU reset
- RAS support for GFX
- Drop last of drmP.h
- Add support for wiping memory on buffer release
- Allow cursor async updates for fb swaps
- Misc fixes and cleanups

amdkfd:
- Add navi14 support
- Add navi12 support
- Add Arcturus support
- CWSR trap handlers updates for gfx9, 10
- Drop last of drmP.h
- Update MAINTAINERS

radeon:
- Misc fixes and cleanups
- Make kexec more reliable by tearing down the GPU

ttm:
- Add release_notify callback

uapi:
- Add wipe memory on release flag for buffer creation

This is the 5.2.7 stable release