Tags

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

https://source.android.com/security/bulletin/2019-02-01
CVE-2018-10879
CVE-2019-2000
CVE-2019-2001

Fix for CVE-2019-1999 not publicly available yet

wireless-drivers fixes for 5.0

First set of small, but importnat, fixes for 5.0.

iwlwifi

* fix a build regression introduced in 5.0-rc1

wlcore

* fix a firmware regression from v4.18-rc1

mt76x0

* fix for configuring tx power from user space

ath10k

* fix wcn3990 regression from v4.20-rc1

Linux 5.0-rc5

First set of new device support, features and cleanup for IIO in the 5.1 cycle

A number of interesting new devices supported plus a good set of staging
cleanup including one graduation and one drop.

New device support
* ad56886
  - Add support for AD5674R/AD5679R with some minor driver changes to support
    more channels.
* ad7768
  - New driver and dt bindings for this 24 bit ADC.
* max44009
  - New driver and dt bindings for this ambient light sensor.
* mpu6050
  - Support the ICM 20602 IMU. Minor tweaks due to slightly different
    register map.
* NPCM adc
  - New driver and dt bindings for this BMC ADC.
* Sensiron SGP30
  - Modifiers for ethanol and H2.
  - New driver and dt bindings.
  - Follow patch added self cleaning support.
* Sensiron SPS30
  - New channel type for mass concentration.
  - New driver and bindings.
  - Minor tidy up patch followed (drop fmt specifier as unused)
* st_pressure
  - lps22hh support. ID plus information structures and dt bindings.
* ti-ads124s08
  - Add binding doc and driver.

Staging graduations
* ad7606 driver and bindings.

Staging drops
* ad7152 CDC driver dropped.  This part is near EoL and no one is known
  to be using it.  If anyone surfaces obviously we can bring the driver
  back.  If not, good to drop it to avoid wasting anyone's time cleaning
  it up.

New features
* bme680
  - DT support and bindings doc.
* isl29018
  - Add regulator for VCC.
* mag3110
  - Add regulators for supplies.
* meson-saradc
  - Support the temperature sensors of more SoCs.
* mma8452
  - Add regulators for power suplies and binding docs to reflect them.
* st-accel
  - Support the undocumented but it seems fairly common _ONT ACPI method
    to specify orientation of the sensor.

Cleanup, minor fixes and fixes for staging driver that have been broken a
long time
* ad5933
  - Drop platform data alternative to specifying the reference voltage
    using a regulator.
  - Use the clock framework to contorl the reference clock.
  - Add a DT binding doc to cover the defacto binding.
* ad7280a
  - Split up some big functions to improve readability.
* ad7606
  - Allow for timeout if interrupt never occurs.
  - Use devm functions to simplify probe and remove.
  - Use the find_closest macro to avoid need for precise values from
    userspace.
  - Add missing vendor prefixes for various DT properties. Note the
    driver is in staging still and there are no known devicetrees.
  - Add explict OF device ID table.
  - Simplify the Kconfig choices
  - Change to a threaded IRQ.
  - SPDX and simple stype fixes.
* ad7816
  - Drop unnecessary variable init.
* ad9523
  - Check a return value that was ignored.
* ad9833
  - Drop platform data.  It was just setting most values to the hardware
    defaults.
  - Use the clock framework to provide the input clock.
* adt7316 (lots of staging cleanup)
  - Fix some wrong register / bit definitions
  - Invert the logic of the check for an ldac pin so it actually makes sense.
  - Read the right register to get internal vref settings
  - Allow adt751x chips to use the internal vref for all DAC channels rather
    than a subset.
  - Remove dac vref bypass control from parts that don't have one.
  - Make the store DAC update mode function consistent with the show one.
  - Fix some spellings and other minor tidy up.
  - Avoid passing irq numbers around by putting all the irq logic in
    one place.
  - Fix an issue with the resolution of DAC control.
  - Fix support of the high resolution DAC mode (for temp proportional output)
    where supported.
  - Fix DAC read and write calculations.
* st_lsm6dsx
  - Drop an unused variable (set but not read)
* xilinx-xadc
  - Check an unhandled return value.

First set of IIO fixes for the 5.0 cycle.

Been a busy month, so these are rather later than they should have been.

* atlas-ph-sensor:
  - Temperature scale didn't correspond to the ABI.
* axp288:
  - A few different fixes around the TS-pin handling.
* ti-ads8688
  - Not enough space in the buffer used to build the scan to allow for
    the timestamp.
* tools - iio_generic_buffer
  - Make num_loops signed so that we really are running for ever
    rather than just a long time when we specify -1.

A single fix for building DT bindings in-tree.

New features for the wifi stack:
 * airtime fairness scheduling in mac80211, so we can share
 * more authentication offloads to userspace - this is for
   SAE which is part of WPA3 and is hard to do in firmware
 * documentation fixes
 * various mesh improvements
 * various other small improvements/cleanups

This also contains the NLA_POLICY_NESTED{,_ARRAY} change we
discussed, which affects everyone but there's no other user
yet.

Power management fixes for 5.0-rc5

 - Since ktime_get() turns out to be problematic for device
   autosuspend in the PM-runtime framework, make it use
   ktime_get_mono_fast_ns() instead (Vincent Guittot).

 - Fix an initial value of a local variable in the "poll idle state"
   code that makes it behave not exactly as expected when all idle
   states except for the "polling" one are disabled (Doug Smythies).

ACPI-related Kconfig fixes for 5.0-rc5

Prevent invalid configurations from being created (e.g. by randconfig)
due to some ACPI-related Kconfig options' dependencies that are not
specified directly (Sinan Kaya).

Two more fixes:
 * sometimes, not enough tailroom was allocated for
   software-encrypted management frames in mac80211
 * cfg80211 regulatory restore got an additional condition,
   needs to rerun the checks after that condition changes

sound fixes for 5.0-rc5

Only three fixes: a fix for Realtek HD-audio looks lengthy, but it's
just a code shuffling, and the actual changes are fairly small.  The
rest are a PCM core fix for a long-standing bug that was recently
scratched by syzkaller, and a trivial USB-audio quirk for DSD
support.

This is the 4.20.6 stable release

This is the 4.19.19 stable release