Tags

This is the 5.4.81 stable release

This is the 4.19.161 stable release

This is the 4.14.210 stable release

This is the 4.9.247 stable release

This is the 4.4.247 stable release

Qualcomm DT updates for 5.11

This adds support for SD card, WiFi, LED, touchscreeni, touchkey and
fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge
support.

Finally IPQ6016 gains support for the QPIC NAND controller.

Qualcomm ARM64 DT updates for 5.11

For SM8250 the recently introduced support for handling boot-loader
stream mappings in the ARM SMMU allow us to enable this, and thereby USB
controller and PHY, SDHCI controller and FastRPC, as well as support for
the SM8250 HDK board has been added. Additionally PRNG and RTC is
enabled.

Similarly for SM8150, the ARM SMMU could be added which allows the
secondary USB controller and PHYs, as well as WiFi to be added and
support for the SM8150 HDK board to be introduced. Additionally
Coresight and support for the last-level cache controller was added.

MSM8916 finally has VDDCX and VDDMX removed as regulators and are now
handled by the rpmpd driver for the devices controlling them. The
Longsheer L8150 gains touchscreen, sensors, vibrator and LED support.

MSM8992 gains USB and SDHCI support as well as an I2C controller and the
associated RMI4 based touchscreen for the Lumia 950.

MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm
support. Then support for the Lumia 950 XL is added.

SDM845 gains interconnect properties for a number of devices and the
GENI wrappers gains iommu stream configuration, which means DMA
operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the
SMMU enabled, a few fixes and the description of the eDP bridge and
panel means that the laptop can now boot mainline with working display,
GPU, WiFi and audio.

SC7180 gains a slew of smaller improvements and fixes.

Qualcomm defconfig updates for 5.11

This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.

Qualcomm driver updates for v5.11

This adds support for the core power domains on MSM8916, MSM8939, SDM660
and SDX55. It adds SM8150 support to the last-level cache controller
driver and it makes it possible to build the Command DB and RPMh drivers
as modules.

It also contains a slew of smaller cleanups, style and bug fixes
throughout the various drivers.

Linux 5.10-rc6

ASoC: Fixes for v5.10

A small set of driver specific fixes, plus a new platform quirk from
Hans.

Release: orange-pi-5.9-20201125-1511

NEWS
====

See also:

- https://xnux.eu/log/
- https://xnux.eu/devices/pine64-pinephone.html
- https://xff.cz/kernels/

2020-11-25:
- pulled in v5.9.11
2020-11-23:
- pulled in v5.9.10
2020-11-17:
- drop ov5640 AF patch
2020-11-17:
- fix camera probe
2020-11-15:
- pulled in v5.9.8 (nothing relevant to PP)
2020-11-10:
- pulled in v5.9.7
2020-11-01:
- pulled in v5.9.3
- added some musb suspend/resume fixes
- fixed regulator probe on a711
2020-10-30:
- added ov5640 autofocus support from Martijn Braam (you'll need /lib/firmware/ov5640_af.bin)
- added fix for DSI panel 36.6 FPS issue (myself)
- pulled in v5.9.2
2020-10-19:
- fix orange pi 3 ethernet
2020-10-12:
- fix issue with dsi clock described here: https://xnux.eu/log/#021
- rebase on v5.9 final
- integrate pinetab panel patches from (untested)
  https://gitlab.com/pine64-org/linux/-/commits/pine64-kernel-5.7.y-pinetabpanel/
2020-09-29:
- add a few more codec API fixes from Samuel
2020-09-28:
- rebase on top of 5.9-rc7
- integrated the newest audio patches from Samuel
2020-09-23:
- port battery thermal regulation fix from p-boot (completely untested, see https://xnux.eu/log/#018)
2020-09-18:
- cedrus panic fix
- rebase on linus/master
2020-09-17:
- further modem driver improvements (fix urc setting on old modem firmwares)
2020-09-13:
- rebase on top of 5.9-rc5
2020-09-12:
- rebase on top of 5.9-rc4+
2020-09-10:
- rebase on top of 5.9-rc4+
- further fixes for the modem driver poweron, support for fast poweroff feature
  present on new modem firmware
- added flash DT changes
- add mounting matrix and a kernel command line option to override it (ignore_mount_matrix)
- https://xff.cz/kernels also contains special kernel builds for my multi-dist image
  (see https://xnux.eu/log/)
- enabled opportunistic sleep
- enabled btrfs support
2020-09-01:
- rebase on top of 5.9-rc3
2020-08-19:
- rebase and port to 5.9-rc1
- fix various issues with 5.9-rc1
- fix sleeps in atomic context in anx7688 driver
- dropped panfrost dvfs patches for now (conflicts, stability issues)
- fix modem UART issues on powerup (sometimes not receiving RDY, etc.)
  - root cause was host UART locking up due to noise on RX, and the
    fix is to only open UART port when the modem is powered
2020-08-11:
- fix sun50i-codec-analog probe failure when built-in
2020-08-09:
- pull in codec changes from Samuel
- don't wait for RDY but poll with empty AT command for the modem's status
2020-08-06:
- added Samuel's patch for making recording from the codec work again
2020-08-05:
- modem driver fixes for BH
2020-08-03:
- fixed AC100 driver to make it work without mod clock
2020-08-02:
- integrated latest Samuel's audio patches + rebased my AC100 support on top
- finished the modem-power driver into a hopefully useable state
2020-07-25:
- rebased on top of 5.8-rc7+
- fixed modem driver issue with not shutting down the modem on poweroff/reset
  on PinePhone (introduced during modem driver rewrite around 5.8-rc5)
- worked around AXP reseting input current limit to 500mA regardless of
  BC detection being disabled (happened on boot with USB-C cable connected
  to USB-C PD charger) (and reverted again)
- improved modem driver
  - initialize the modem configuration for proper sleep
  - setup QDAI automatically from DTS
  - show modem firmware version in dmesg
  - added rfkill interface
  - handle URC caching during suspend
2020-07-16:
- added HP jack detection patches from A-wai
2020-07-14:
- added support for Pinebook Pro
- fix issue in my bl_pwm PinePhone patch that broke Pinebook Pro's backlight
2020-07-13:
- rebased on top of 5.8-rc5
- improved HW led trigger API
- more modem-power work (change to serdev, recv messages from the modem)
- support HDMI audio on PinePhone
- bump PD power requirement to 15W on PinePhone
2020-07-08:
- refactoring of the modem driver, moved to modem-5.8 branch (not finished
  yet, see TODO in the driver)
- update pinephone 1.0-1.2 dts to reflect the differences in modem setup
- enable orange pi 3 hdmi audio
2020-07-06:
- rebased on top of 5.8-rc4
2020-07-05:
- Added fixes for PinePhone panel initialization after resume from sleep
2020-07-04:
- Integrated Clément's HDMI audio series (20200704113902.336911-1-peron.clem@gmail.com)
- Integrated Clément's panfrost DVFS series (20200704102535.189647-1-peron.clem@gmail.com)

My kernel's main integration branch is 'orange-pi-$VER' (this one).
No other branch is supposed to work alone. My defconfigs are tested
and work on the boards I support. Read the README.md for more info.

Only my branches based on the current mainline kernel branch are
maintained (those are usually the -rc# kernels!). You can find the
current mainline version here https://www.kernel.org/ (mainline: ...)

My prebuilt kernels can be found at https://xff.cz/kernels/ You can
use them to test that your board works, or just run them without
bothering with building everything yourself. I run them on all my
boards.

My website is https://xnux.eu and may contain useful advice.

Good luck!

     ~megi

This is the 5.9.11 stable release

This is the 5.4.80 stable release

This is the 4.19.160 stable release

This is the 4.14.209 stable release

This is the 4.9.246 stable release

This is the 4.4.246 stable release

Release: orange-pi-5.9-20201123-0250

NEWS
====

See also:

- https://xnux.eu/log/
- https://xnux.eu/devices/pine64-pinephone.html
- https://xff.cz/kernels/

2020-11-23:
- pulled in v5.9.10
2020-11-17:
- drop ov5640 AF patch
2020-11-17:
- fix camera probe
2020-11-15:
- pulled in v5.9.8 (nothing relevant to PP)
2020-11-10:
- pulled in v5.9.7
2020-11-01:
- pulled in v5.9.3
- added some musb suspend/resume fixes
- fixed regulator probe on a711
2020-10-30:
- added ov5640 autofocus support from Martijn Braam (you'll need /lib/firmware/ov5640_af.bin)
- added fix for DSI panel 36.6 FPS issue (myself)
- pulled in v5.9.2
2020-10-19:
- fix orange pi 3 ethernet
2020-10-12:
- fix issue with dsi clock described here: https://xnux.eu/log/#021
- rebase on v5.9 final
- integrate pinetab panel patches from (untested)
  https://gitlab.com/pine64-org/linux/-/commits/pine64-kernel-5.7.y-pinetabpanel/
2020-09-29:
- add a few more codec API fixes from Samuel
2020-09-28:
- rebase on top of 5.9-rc7
- integrated the newest audio patches from Samuel
2020-09-23:
- port battery thermal regulation fix from p-boot (completely untested, see https://xnux.eu/log/#018)
2020-09-18:
- cedrus panic fix
- rebase on linus/master
2020-09-17:
- further modem driver improvements (fix urc setting on old modem firmwares)
2020-09-13:
- rebase on top of 5.9-rc5
2020-09-12:
- rebase on top of 5.9-rc4+
2020-09-10:
- rebase on top of 5.9-rc4+
- further fixes for the modem driver poweron, support for fast poweroff feature
  present on new modem firmware
- added flash DT changes
- add mounting matrix and a kernel command line option to override it (ignore_mount_matrix)
- https://xff.cz/kernels also contains special kernel builds for my multi-dist image
  (see https://xnux.eu/log/)
- enabled opportunistic sleep
- enabled btrfs support
2020-09-01:
- rebase on top of 5.9-rc3
2020-08-19:
- rebase and port to 5.9-rc1
- fix various issues with 5.9-rc1
- fix sleeps in atomic context in anx7688 driver
- dropped panfrost dvfs patches for now (conflicts, stability issues)
- fix modem UART issues on powerup (sometimes not receiving RDY, etc.)
  - root cause was host UART locking up due to noise on RX, and the
    fix is to only open UART port when the modem is powered
2020-08-11:
- fix sun50i-codec-analog probe failure when built-in
2020-08-09:
- pull in codec changes from Samuel
- don't wait for RDY but poll with empty AT command for the modem's status
2020-08-06:
- added Samuel's patch for making recording from the codec work again
2020-08-05:
- modem driver fixes for BH
2020-08-03:
- fixed AC100 driver to make it work without mod clock
2020-08-02:
- integrated latest Samuel's audio patches + rebased my AC100 support on top
- finished the modem-power driver into a hopefully useable state
2020-07-25:
- rebased on top of 5.8-rc7+
- fixed modem driver issue with not shutting down the modem on poweroff/reset
  on PinePhone (introduced during modem driver rewrite around 5.8-rc5)
- worked around AXP reseting input current limit to 500mA regardless of
  BC detection being disabled (happened on boot with USB-C cable connected
  to USB-C PD charger) (and reverted again)
- improved modem driver
  - initialize the modem configuration for proper sleep
  - setup QDAI automatically from DTS
  - show modem firmware version in dmesg
  - added rfkill interface
  - handle URC caching during suspend
2020-07-16:
- added HP jack detection patches from A-wai
2020-07-14:
- added support for Pinebook Pro
- fix issue in my bl_pwm PinePhone patch that broke Pinebook Pro's backlight
2020-07-13:
- rebased on top of 5.8-rc5
- improved HW led trigger API
- more modem-power work (change to serdev, recv messages from the modem)
- support HDMI audio on PinePhone
- bump PD power requirement to 15W on PinePhone
2020-07-08:
- refactoring of the modem driver, moved to modem-5.8 branch (not finished
  yet, see TODO in the driver)
- update pinephone 1.0-1.2 dts to reflect the differences in modem setup
- enable orange pi 3 hdmi audio
2020-07-06:
- rebased on top of 5.8-rc4
2020-07-05:
- Added fixes for PinePhone panel initialization after resume from sleep
2020-07-04:
- Integrated Clément's HDMI audio series (20200704113902.336911-1-peron.clem@gmail.com)
- Integrated Clément's panfrost DVFS series (20200704102535.189647-1-peron.clem@gmail.com)

My kernel's main integration branch is 'orange-pi-$VER' (this one).
No other branch is supposed to work alone. My defconfigs are tested
and work on the boards I support. Read the README.md for more info.

Only my branches based on the current mainline kernel branch are
maintained (those are usually the -rc# kernels!). You can find the
current mainline version here https://www.kernel.org/ (mainline: ...)

My prebuilt kernels can be found at https://xff.cz/kernels/ You can
use them to test that your board works, or just run them without
bothering with building everything yourself. I run them on all my
boards.

My website is https://xnux.eu and may contain useful advice.

Good luck!

     ~megi

Linux 5.10-rc5