Tags

This is the 4.14.167 stable release

This is the 4.9.211 stable release

This is the 4.4.211 stable release

Linux 5.5-rc7

Second set of new device support, features and minor fixes for IIO in the 5.6 cycle

Just a small set this time.

As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release.  A short delay here will
do little harm.

New device support
* adis16480
  - Add support for adis16490. After earlier rework this is simple ID plus
    chip info.

Features
* kxcjk1013
  - mount matrix support.
* lsm_6dsx
  - mount matrix support.

Cleanups / minor or late breaking fixes
* ad7124
  - add support to ad-sigma-delta and use it in this driver to allow
    the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
    using this framework.
* adis
  - use delay structure now available in SPI to handle transfer delays
  - introduce a timeouts structure to allow support of new devices
* ak8975
  - drop platform data support.  No one is using it and it adds complexity.
  - use device_get_match_data rather than open coding much the same thing.
* dht11
  - drop meaningless todo
* at91-samad2_adc
  - switch to dma_request_chan
* altas-sensor
  - add a helper function to compute number of channels.  Needed for new device
    support that is under review.
* bma400
  - add a lower bound check on scale.
* inv_mpu6050
  - add support for temperature data in the fifos for all chips.
  - support an odd situation where a board supports only interrupt triggering
    on both edges.
* st_lsm6dsx
  - check and handle potential error return.
* st_sensors
  - fix some values for the LSM9DS0 which is ever so slightly different from
    other devices using the same whoami value.
  - switch over to generic functions from dt ones, avoiding need for separate
    ACPI support.
* stm32-adc
  - switch to dma_request_chan
  - suppress an error print in deferred probe case.
* stm32-dac
  - drop private data structure element for reset controller as only used in
    probe.
  - reflect more cleanly that the reset controller is optional whilst ensuring
    that if is specified any errors are caught.
* stm32-dfsdm
  - switch to dma_request_chan
  - fix missing application of formatting to single conversions.
  - ensure the sampling rate is updated when the oversampling ratio is changed.

USB driver fixes for 5.5-rc7

Here are some small USB driver and core fixes for 5.5-rc7

There's one fix for hub wakeup issues and a number of small usb-serial
driver fixes and device id updates.

The hub fix has been in linux-next for a while with no reported issues,
and the usb-serial ones have all passed 0-day with no problems.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the 5.4.13 stable release

This is the 4.19.97 stable release

This is the 4.14.166 stable release

phy: for 5.6

*) Add support in PHY core to create link between PHY consumer and PHY
   provider
*) Add DisplayPort PHY configuration set to be used for negotiating the
   configurations to be used between DisplayPort controller and
   DisplayPort PHY
*) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for
   TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for
   J721E SoC (Supports USB and PCIe)
*) Add PHY driver for eMMC PHY in Intel LGM SoC
*) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new
   Synopsys USB Controller
*) Add support for 16nm SATA PHY present in Broadcom 7216 SoC
*) Fix lost packet issue, fix MDIO from getting inaccessible, fix
   occasional transaction failures, fix USB driver from crashing in
   Broadcom USB PHY driver
*) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150
*) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from
   display controller to rockchip-inno-dsidphy
*) Other cleanups including compile testing for some of the PHY drivers,
   fixing Kconfig indentation, duplicate writes in drivers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

ASoC: Fixes for v5.5

This is mostly driver specific fixes, plus an error handling fix
in the core.  There is a rather large diffstat for the stm32 SAI
driver, this is a very large but mostly mechanical update which
wraps every register access in the driver to allow a fix to the
locking which avoids circular locks, the active change is much
smaller and more reasonably sized.

A few fixes:
 * -O3 enablement fallout, thanks to Arnd who ran this
 * fixes for a few leaks, thanks to Felix
 * channel 12 regulatory fix for custom regdomains
 * check for a crash reported by syzbot
   (NULL function is called on drivers that don't have it)
 * fix TKIP replay protection after setup with some APs
   (from Jouni)
 * restrict obtaining some mesh data to avoid WARN_ONs
 * fix deadlocks with auto-disconnect (socket owner)
 * fix radar detection events with multiple devices

This is the 5.4.12 stable release

This is the 4.19.96 stable release

This is the 4.14.165 stable release

This is the 4.9.210 stable release

This is the 4.4.210 stable release

regulator: add regulator_equal()

Qualcomm ARM dts updates for v5.6

* Add SAW L2 nodes to boot secondary cpus on IPQ40xx
* Fix remaining IRQ_TYPE_NONE on APQ8084
* Update tsens node to new style
* Add modem remoteproc node to MSM8974
* Move ADSP SMD edge into ADSP remoteproc node for MSM8974
* Add and enable wireless communication subsystem on MSM8974 and Fairphone 2
* Add MSM8974 interconnect provider nodes
* Add MSM8974 OCMEM node