Tags

This is the 4.8.8 stable release

This is the 4.4.32 stable release

Third set of IIO new device support, features and cleanup for the 4.10 cycle.

Includes Peter Rosin's interesting drivers for a comparator. First complex
use we have had with an analog front end made from discrete components.

Brian Masney's work on moving the tsl2583 driver out of staging also
feature extensively!

New Drivers
* DAC based on a digital potentiometer
  - New driver for the use of a dpot as a DAC. Includes bindings and Axentia
  entry in vendor prefixes.
* Envelope detector baed on DAC and a comparator including device tree
  bindings.

Staging Graduation
* tsl2583.

Core new features
- Core provision for _available attributes.   This one had been stalled for
  a long time until Peter picked it up and ran with it!
- In kernel interface helpers to retrieve available info from channels.

Driver new features
* mcp4531
  - Add range of available raw values (used for the dpot dac driver).

Driver cleanups and fixes for issues introduced
* ad7766
  - Testing the wrong variable following devm_regulator_bulk_get introduced
  with the driver earlier in this cycle.
* ad9832
  - Fix a wrong ordering in the probe introduced in the previous set of
    patches.  A use before allocation bug.
* cros_ec_sensors
  - Testing for an error in a u8 will never work.
* mpu3050
  - Remove duplicate initializer for the module owner.
  - Add missing i2c dependency.
  - Inform the i2c mux core how it is used - step one in implifying device
  tree bindings.
* st-sensors
  - Get rid of large number of uninformative defines in favour of putting the
  constants where they are relevant. It is clear what they are from where
  they are used.
* tsl2583
  - Fix unused function warning when CONFIG_PM disabled and remove the
  ifdefs in favour of __maybe_unused.
  - Refactor taos_chip_on  to only read relevant registers.
  - Make sure calibscale and integration time are being set.
  - Verify chip is in ready to be used before calibration.
  - Remove some repeated checks for chip status (it's protected by a mutex
  so can't change until it's released)
  - Change current state storage from a tristate enum to a boolean seeing as
  only two values are actually used now.
  - Drop a redundant write to the control regiser in taos_probe (it's a noop)
  - Drop the FSF mailing address.
  - Clean up logging to not use hard coded function names (use __func__
  instead).
  - Cleanup up variable and function name prefixes.
  - Alignment of #define fixes.
  - Fix comparison between signed and unsigned integer warnings.
  - Add some newlines in favour of readability.
  - Combine the two sysfs ABI docs that somehow ended up in different places.
  - Fix multiline comment syntax.
  - Move a code block to inside an else statement as it makes more sense there.
  - Change tsl2583_als_calibrate to return 0 rather than a value nothing
  reads.
  - Drop some pointless brackets
  - Don't assume 32bit unsigned int.
  - Change to a per device instance lux table.
  - Add missing tsl2583 to the list of supported devices in the intro comments.
  - Improve commment on clearing of interrupts.
  - Drop some uninformative comments.
  - Drop a memset call that doesn't do anything useful any more.
  - Don't initialize some return variables that are always set.
  - Add Brian Masney as a module author after all these changes.

Linux 4.9-rc5

driver core fixes for 4.9-rc5

Here are two driver core fixes for 4.9-rc5.

The first resolves an issue with some drivers not liking to be unbound
and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which
solves some reported problems with graphics and storage drivers.  The
other resolves a smatch error with the 4.9-rc1 driver core changes
around this feature.

Both have been in linux-next with no reported issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Qualcomm ARM Based SoC Updates for v4.10

* Enable GPIOLIB for QCOM ARM64 platforms

Qualcomm ARM Based Driver Updates for v4.10

* Fixup QCOM SCM to use devm_reset_controller_register
* Add QCOM pinctrl to Qualcomm MAINTAINERS entry
* Add PM8994 regulator definitions
* Add stub for WCNSS_CTRL API

Qualcomm ARM Based defconfig Updates for v4.10

* Fixup MDM9615 option names

Qualcomm ARM64 Updates for v4.10

* Add Hexagon SMD/PIL nodes
* Add DB820c PMIC pins
* Fixup APQ8016 voltage ranges
* Add various MSM8996 nodes to support SMD/SMEM/SMP2P
* Add support for Huawei Nexus 6P (Angler)
* Add support for LG Nexus 5x (Bullhead)

Qualcomm ARM64 Based defconfig Updates for v4.10

* Enable defconfig options for MSM8992/8994

amd, radeon, i915, imx, msm and udl fixes

This is the 4.8.7 stable release

This is the 4.4.31 stable release

This is the 3.12.67 stable release

sound fixes for 4.9-rc5

this became a largish pull-request, as we've got a bunch of pending
ASoC fixes at this time.  One noticeable change is the removal of
error directive in uapi/sound/asoc.h.  We found that the API has
been already used on Chromebooks, so we need to support it even now.

A slight big LOC is found in Qualcomm lpass driver, but the rest are
all small and easy fixes for ASoC drivers (sti, sun4i, Realtek codecs,
Intel, tas571x, etc) in addition to the patches to harden the ALSA
core proc file accesses.

IOMMU-Fixes for Linux v4.9-rc4

Two places need fixing:

	* Four patches from Robin Murphy fix several issues with the
	  recently merged generic DT-bindings support for arm-smmu
	  drivers

	* A fix for a dead-lock issue in the VT-d driver, which shows up
	  on iommu hotplug

- gpu idling rework for s/r (Imre)
- vlv mappable scanout fix
- speed up probing in resume (Lyude)
- dp audio workarounds for gen9 (Dhinakaran)
- more conversion to using dev_priv internally (Ville)
- more gen9+ wm fixes and cleanups (Maarten)
- shrinker cleanup&fixes (Chris)
- reorg plane init code (Ville)
- implement support for multiple timelines (prep work for scheduler)
  from Chris and all
- untangle dev->struct_mutex locking as prep for multiple timelines
  (Chris)
- refactor bxt phy code and collect it all in intel_dpio_phy.c (Ander)
- another gvt with bugfixes all over from Zhenyu
- piles of lspcon fixes from Imre
- 90/270 rotation fixes (Ville)
- guc log buffer support (Akash+Sagar)
- fbc fixes from Paulo
- untangle rpm vs. tiling-fences/mmaps (Chris)
- fix atomic commit to wait on the right fences (Daniel Stone)

Second set of IIO fixes for the 4.9 cycle.

Interestingly scale related fixes for accelerometers at both ends of
the range.  Obviously more varied devices turning up than we've seen before!

* ad5933
  - fix an uninitialized value in a return case that is winding up GCC.
* hid sensors
  - missing pm function prevents hid rotations sensors from working on newer
  ISH hubs (works by luck on older ones)
  - increase of scale precision needed to fix a case where on a yoga 260
  the reported scale is 0 (presumably a high precision but very low g sensor).
* st_sensors
  - fix an issue seen with the hs3lis331dl where the range is much greater
  than previous devices (100's of g) and hence the per bit scale is greater
  than 1.