Tags

Qualcomm driver updates for v5.9

For RPMh this fixes an issue where ktime was used during suspend, allows
the driver to be used on ARM targets and some minor cleanups.

It adds support for the latest format version in the socinfo driver and
adds identifiers for SM8250 and SDM630.

SMD-RPM gains compatibles for MSM8994 and MSM8936 and the Qualcomm SCM
gains compatibles MSM8994 and IPQ8074.

The GENI core code gains interconnect path voting and performance level
support, with subsequent patches integrating this with the SPI, I2C,
UART and QSPI drivers.

Following this the KGDB support for the GENI serial driver is improved,
the performance related to chip-select is improved for SPI and QSPI.

Qualcomm ARM dts updates for v5.9

Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.

Qualcomm ARM64 defconfig updates for v5.9

Enable the Qualcomm RPM power-domain, RTC and IPCC drivers, the SDM845
video clock controller driver and the SM8250 TLMM pinctrl driver.

Qualcomm ARM64 DT updates for v5.9

For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.

SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.

SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.

SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support

SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.

IPQ8074 gains USB and SDHCI support.

MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.

MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.

The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.

Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that
were failing on older SoCs and one to fix Cedrus on the H6.

A bunch of patches to generally make sunxi_defconfig more helpful and
add all the new drivers merged recently.

Our usual number of patches to improve the Allwinner Device Tree
support, including:
  - CPUFreq / Thermal throttling support for the H5
  - Touchscreen support for the Pinephone
  - New boards: PinePhone v1.2

media fixes for v5.8-rc7

wireless-drivers-next patches for v5.9

First set of patches for v5.9. This comes later than usual as I was
offline for two weeks. The biggest change here is moving Microchip
wilc1000 driver from staging. There was an immutable topic branch with
one commit moving the whole driver and the topic branch was pulled
both to staging-next and wireless-drivers-next. At the moment the only
reported conflict is in MAINTAINERS file, so I'm hoping the move
should go smoothly.

Other notable changes are ath11k getting 6 GHz band support and rtw88
supporting RTL8821CE. And there's also the usual fixes, API changes
and cleanups all over.

Major changes:

wilc1000

* move from drivers/staging to drivers/net/wireless/microchip

ath11k

* add 6G band support

* add spectral scan support

iwlwifi

* make FW reconfiguration quieter by not using warn level

rtw88

* add support for RTL8821CE

Linux 5.8-rc6

Xilinx ZynqMP DisplayPort Subsystem driver

ASoC: Fixes for v5.8

An awful lot of mostly small fixes here, mainly for x86 based platforms
and the CODEC drivers mainly used on them.  For the most part this is
either minor device specific stuff which seems to come from detailed
testing or robustness against errors which comes from people having done
some fuzzing runs aginst the topology code.

amd-drm-next-5.9-2020-07-17:

amdgpu:
- SI UVD/VCE clock support
- Updates for Sienna Cichlid
- Expose drm rotation property
- Atomfirmware updates for renoir
- updates to GPUVM hub handling for different register layouts
- swSMU restructuring and cleanups
- RAS fixes
- DC fixes
- mode1 reset support for Sienna Cichlid
- Add support for Navy Flounder GPUs

amdkfd:
- Add SMI events watch interface

UAPI:
- Add amdkfd SMI events watch interface
  Userspace which uses this interface:
  https://github.com/RadeonOpenCompute/rocm_smi_lib/commit/2235ede34c456f1c7d3490f6fe74825d442d272e

regulator: Fixes for v5.8

The more substantial fix here is the rename of the da903x driver which
fixes a collision with the parent MFD driver name which caused issues
when things were built as modules.  There's also a fix for a mislableled
regulator on the pmi8994 which is quite important for systems with that
device.

Power management fixes for 5.8-rc6

Add missing handling of a command line switch to the intel_pstate
driver (Rafael Wysocki) and fix the freeing of the operating
performance point (OPP) entries for the legacy (v1) OPP table
type (Walter Lozano).

This is the 4.19.133 stable release

This is the 5.4.52 stable release

This is the 5.7.9 stable release

amd-drm-fixes-5.8-2020-07-15:

amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix

wireless-drivers fixes for v5.8

First set of fixes for v5.8. Various important fixes for iwlwifi and
mt76.

iwlwifi

* fix sleeping under RCU

* fix a kernel crash when using compressed firmware images

mt76

* tx queueing fixes for mt7615/22/63

* locking fix

* fix a crash during watchdog reset

* fix memory leaks