Tags

 * fix use-after-free in mac80211 TXQs
 * fix RX STBC byte order
 * fix debugfs rename crashing due to ERR_PTR()
 * fix missing regulatory notification

Second set of IIO new device support, features and cleanup for the 5.2 cycle.

New device suport
* ad7606
  - Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
  - New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
  - Support the lsm6dsr, new device information structure and dt bindings.
* srf04
  - Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
    support of different required trigger pulse lengths.
* st-accel
  - Support the ls2de12, new device info and dt bindings.
* ti-ads8344
  - New driver for this 8 channel, 16 bit SPI ADC.

Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085

Cleanups and minor fixes / additions
* ad5758
  - Fixup for some changes between preproduction parts and final part.
* ad7606
  - Refactor handling of oversampling to make it easy to vary between
    supported devices.
* ad9832
  - Organise includes.
  - Clock framework to handle clocks.
* ad9834
  - Drop unnecessary parenthesis.
* bmc150
  - Use __func__ rather than hardcoding.
* dummy_evgen.
  - Fix a memleak on error in probe.
* kxcjk1013
  - Add KXCJ91008 ACPI ID as seen in the wild.
  - Use __func__ rather than hardcoding.
* imx7d
  - Local dev variable to simplify code a bit.
  - dev_err replaces pr_err to give more info.
  - devm_platform_ioremap_resource for small reduction in boilerplate.
  - Simplify probe and remove by sharing suspend / resume logic.
  - Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
  - Remove a variable that was never read.
  - Open code values where they are effectively described by what is assigned
    to them rather than using uninformative defines.
* max31856
  - Avoid an unintialized ret variable in a path that can't actually occur
    but is hard for a static checker to know.
* max9611
  - White space
* mpu3050
  - Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
  - Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
  - Fix missing dependencies.
* stm32-timer trigger
  - Fix a build issue when disabled.
* ti-ads7950
  - Fix mising dependency on CONFIG_GPIOLIB.

phy: for 5.2

  *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
     that can be used to undo the operation performed in xlate
  *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
     G12A SoC Family.
  *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
     one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
  *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
  *) Add new driver to support UFS M-PHY in MediaTek SoC
  *) Add new driver to support XUSB pad controller in Tegra186 SoCs
  *) Add new driver to support SERDES in TI's AM654 platform
  *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
     to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
  *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
  *) Add support for SERDES6G in phy-ocelot-serdes.c
  *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
  *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
  *) Add support to shut off regulators that power UFS during system suspend
  *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
     channel which helps to enable/disable interrupts for each instance
     independently
  *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
     PHY operates correctly over the entire temperature range.
  *) Use devm_clk_get_optional to get optional clocks instead of adding
     custom error checks

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Linux 5.1-rc6

sound fixes for 5.1-rc6

Two core fixes for long-standing bugs for the races at concurrent
device creation and deletion that were (unsurprisingly) spotted by
syzkaller with usb-fuzzer.  The rest are usual small HD-audio fixes.

This is the 5.0.9 stable release

This is the 4.19.36 stable release

This is the 4.14.113 stable release

This is the 4.9.170 stable release

Allwinner H3/H5 changes for 5.2

Our usual bunch of changes shared between arm and arm64, the most notable
one being:
  - Fix of improper usage of DT bindings, thanks to the DT validation
  - Add the SID for the H3 and H5
  - New board: RerVision H3-DVK

Allwinner arm64 DT changes for 5.2

Our usual bunch of patches, the most notable one being:
  - Fixing the DTC warnings
  - Fix DT bindings not being properly respected, thanks to the DT
    validation
  - New Board: Oceanic 5205, Beelink GS1, Orange Pi3

Allwinner arm64 defconfig changes for 5.2

Just a single patch to enable our SPI controller on the arm64 defconfig.

Allwinner DT changes for 5.2

This PR is pretty significant, but it been mostly about:
  - Fixing the DTC warnings in most of our DT. We're now down to 2
    warnings, from several thousands.
  - Fixing a good number of minor issues, typos, and so on thanks to the DT
    validation tools
  - Describe the MBUS controller and the special DMA RAM mapping on the A13
  - Add support for the LRADC on the A83t
  - Add support for the I2C bus used for the PMIC on the A33
  - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes

Allwinner clock changes for 5.2

Our usual bunch of changes, this time, it's mainly:

  - Export a new clock for the MBUS controller on the A13
  - H6 fixes to support a finer clocking of the video and VPU engines
  - Add some Kconfig options
  - Some bit offset fixes

Allwinner clocks fixes for 5.1

Some fixes for odd cases of the NKMP clocks.

Allwinner fixes for 5.1

 - Pinctrl related fixes for the A33 NAND controller
 - Fix the refcounting of DT nodes in our core code
 - Fix for a typo'd DT property

wireless-drivers-next patches for 5.2

Nothing really special standing out this time, iwlwifi being the most
active driver.

Major changes:

iwlwifi

* send NO_DATA events so they can be captured in radiotap

* support for multiple BSSID

* support for some new FW API versions

* support new hardware

* debugfs cleanups by Greg-KH

qtnfmac

* allow each MAC to specify its own regulatory rules

phy: for 5.1-rc

  *) Fix sun4i-usb PHY driver to get USB gadget working on H3/R40/V3/V3s
  *) Fix cable state handling in phy-twl4030-usb driver to get rid of
     regulator_put() warning
  *) Fix linker errors and compilation warnings got with randconfig
  *) Fix sparse warnings and .cocci warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

This is the 5.0.8 stable release