-
-
qcom-clk-for-6.1994c77ed · ·
Qualcomm clock updates for v6.1 This introduces display clock controllers are introduces for SM6115 and SM8450, and SC8280XP gains a GPU clock controller. MSM8909 and SM6375 gains global and SMD RPM clock controller drivers. The handling of GDSCs with PWRSTS_RET was fixed, to keep the GDSC on while powering down the parent supply. This solved retention issues during suspend of USB on sc7180/7280 and SC8280XP. SM6115 and QCM2260 are moved to reuse PLL configuration. SDM660 SDCC1 was moved to floor ops. Support for the APCS PLLs for IPQ8064, IPQ8074 and IPQ6018 was added/fixed. The MSM8996 CPU clocks was updated, with support for ACD clocks added. Support for SDM670 was added to the SDM845 Glbal clock controller and the RPMh clock controller driver. Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for MSM8660, MSM8916, MSM8939, MSM8960 global clock controllers, IPQ8064 LPASS clock controller and MSM8960 multimedia clock controller. Support for per-reset defined delay of was introduced.
-
sdm845-5.19.12c19a1c06 · ·
sdm845-5.19.12 Upgrade kernel to 5.19.12, merging in following tags: - v5.19.8 - v5.19.9 - v5.19.10 - v5.19.11 - v5.19.12 Additionally: - sdm845.config: enable BTRFS as built-in
-
qcom-arm64-for-6.13d59187e · ·
Qualcomm ARM64 DTS updates for 6.1 Support for Samsung Galaxy E5, E7 and Grand Max is added, with support for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value Edition gains magnetometer support. MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs. On SA8295P ADP problems arising from regulators being switched into low-power mode is worked around by removing this ability, for now. The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC related updates are introduced. On SC7280 support for the CPU and LLC bwmon instances are introduced. Soundwire, audio codecs and sound introduced for a variety of boards. Using required-opps the USB controllers votes for a minimum corner on VDD_CX. The onboard USB Hub Herobrine is described. A new board, the Google Evoker is added, as is another revision of Herobrine Villager. On SC8280XP the USB controllers are marked as wakeup-sources, to keep them powered during suspend. The CRD has HID devices marked as wakeup-sources to enable resuming the system. In addition to these changes the alternative touchpad is introduced on the Lenovo ThinkPad X13s. SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350 interconnect providers and GPI DMA is introduced. A description of the PM7280b PMIC is added to Fairphone FP4 on SM7225. With the multi-MSI support added in the PCIe controller, SM8250 gets all its MSI interrupts added. UFS ICE and the second SDHCI controller is introduced on SM8450. Support for the Sony Xperia 1 IV is introduced. Throughout a variety of platforms the TCSR mutex syscon is replaced with the MMIO-based binding. TCSR nodes gained proper compatibles and halt syscon nodes are split out from the mutex ranges. A range of fixes to align with DT bindings are introduced. Among these are the changes to the follow the TLMM binding and suffix pinctrl states with -state and subnodes thereof with -pins, another is a number of changes transitioning to use -gpios and introduction of proper parent clock references in various clock providers.
-
qcom-dts-for-6.15cbd2016 · ·
Qualcomm ARM DTS updates for 6.1 This adds extends the IPQ8064 support with the two variants IPQ8062 and IPQ8065. MSM8974 and APQ8084 gained RPM stats support. The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS ZenWatch 2 and LG G Watch R. MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got the TMA340 Touchscreen described. A wide range of improvements are done throughout the DTS files to align with bindings, fix issues and improve structure on things.
-
qcom-drivers-for-6.1df646a17 · ·
Qualcomm driver updates for 6.1 The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth on SDM845 and SC7280. The LLCC driver is extended to provide per-platform register mappings to the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the passed qmi_elem_info to be const. Support for SDM845 is added to the sleep stats driver. Power-domains for the SM6375 platform is added to RPMPD and the platform is added to socinfo, together with the PM6125 pmic id. A couple of of_node reference issues are corrected in the smem state and smsm drivers. The Qualcomm SCM driver binding is converted to YAML.
-
qcom-defconfig-for-6.110fa117b · ·
Qualcomm ARM defconfig updates for 6.1 This enables command-db, ocmem, rpmh and rpmhpd drivers in the multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used across MSM8974, MSM8226, MSM8916 and APQ8084. Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.