Tags

Three small fixes:
 * we hit a failure path bug related to
   ieee80211_txq_setup_flows()
 * also use kvmalloc() to make that less likely
 * fix a timing value shortly after boot (during
   INITIAL_JIFFIES)

Some relatively small changes:
 * typo fixes in docs
 * APIs for station separation using VLAN tags rather
   than separate wifi netdevs
 * some preparations for upcoming features (802.3 offload
   and airtime queue limits (AQL)
 * stack reduction in ieee80211_assoc_success()
 * use DEFINE_DEBUGFS_ATTRIBUTE in hwsim

Power management fix for 5.4-rc7

Fix an "unchecked MSR access" warning in the intel_pstate cpufreq
driver (Srinivas Pandruvada).

next-20191108

sound fixes for 5.4-rc7

It became a bit largish, but all small and good for 5.4.

- A regression fix of ALSA timer code bug that sneaked in by a
  recent cleanup; never trust innocent-looking guys...

- Fix for compress API max size check signedness

- Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI

- A few fixes for SOF: memory leak, sanity-check and build fixes

- A collection of device-specific fixes: firewire, rockchip, ASoC
  HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373

ASoC: Updates for v5.5

Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.

 - Lots more cleanups from Morimoto-san.  Now that everything is a
   component this is mostly about refactorings to clarify and simplify
   the core, a combination of things that are no longer required due to
   refactorings and spotting similarities.
 - Many fixes to the Sound Open Firmware code.
 - Wake on voice support for Chromebooks.
 - SPI support for RT5677.
 - New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
   with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.

ASoC: Fixes for v5.4

These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.

drm-fixes-5.4-2019-11-06:

amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus

radeon:
- Port an SI power fix from amdgpu

A few clock patches for sunxi, mostly to export new clocks to the DT,
and fix some issues with the clock tree on the H6.

A few more DT patches for 5.5, mostly:
  - USB3 support for the H6
  - Deinterlacer support for the H3
  - eDP Bridge support on the Teres-I
  - More DT cleanups thanks to the validation

One patch to add back the PMU node that was removed because the
interrupts were improper in a previous fixes PR.

This is the 5.3.9 stable release

This is the 4.19.82 stable release

This is the 4.14.152 stable release

This is the 4.9.199 stable release

This is the 4.4.199 stable release

phy: for 5.5

  *) Add a new PHY driver for USB3 PHY on Allwinner H6 SoC
  *) Add a new PHY driver for Innosilicon Video Combo PHY(MIPI/LVDS/TTL)
  *) Add support in xusb-tegra210 PHY driver to get USB device mode functional
     in Tegra 210
  *) Add support for SM8150 QMP UFS PHY in phy-qcom-qmp PHY driver
  *) Fix smatch warning (array off by one) in phy-rcar-gen2 PHY driver
  *) Enable mac tx internal delay for rgmii-rxid in phy-gmii-sel driver
  *) Fix phy-qcom-usb-hs from registering multiple extcon notifiers during PHY
     power cycle
  *) Use devm_platform_ioremap_resource() in phy-mvebu-a3700-utmi,
     phy-hisi-inno-usb2, phy-histb-combphy and regulator_bulk_set_supply_names()
     in xusb to simplify code
  *) Remove unused variable in xusb-tegra210 and phy-dm816x-usb
  *) Fix sparse warnings in phy-brcm-usb-init

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

wireless-drivers-next patches for 5.5

First set of patches for 5.5. The most active driver here clearly is
rtw88, lots of patches for it. More quiet on other drivers, smaller
fixes and cleanups all over.

This pull request also has a trivial conflict, the report and example
resolution here:

https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au

Major changes:

rtw88

* add deep power save support

* add mac80211 software tx queue (wake_tx_queue) support

* enable hardware rate control

* add TX-AMSDU support

* add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support

* add power tracking support

* add 802.11ac beamformee support

* add set_bitrate_mask support

* add phy_info debugfs to show Tx/Rx physical status

* add RFE type 3 support for 8822b

ath10k

* add support for hardware rfkill on devices where firmware supports it

rtl8xxxu

* add bluetooth co-existence support for single antenna

iwlwifi

* Revamp the debugging infrastructure

Qualcomm ARM64 Based defconfig Updates for v5.5

* Enable Qualcomm cpufreq, watchdog, prng, socinfo, SPI, and QSPI controllers
* Enable SN65DSI86 display bridge
* Enable QCA Bluetooth over Uart
* Enable various Qualcomm remoteproc dependencies

Qualcomm ARM64 Updates for v5.5

* Add thermal IRQ support on MSM8916, SDM845, MSM8996, and QCS404
* Fix thermal HW ids for cpus on MSM8916
* Add blsp1 UART3 and  blsp1 BAM on MSM8998
* Add volume buttons and WCNSS for Wifi and BT on MSM8916 LongCheer-l8150
* Fixup load on l21 for SD on apq8096-db820c
* Enable LVS1/2, APSS watchdog, and select UFS reset gpio for SDM845
* Disable coresight by default on MSM8998
* Enable bluetooth and remove retention idle state on MSM8998-clamshell
* Enable adsp, cdsp, and mpss on C630
* Enable bluetooth on MSM8998-mtp
* Delete zap shader on SDM845-cheza
* Add tactile buttons and hall sensor on MSM8916-Samsung-A2015
* Add Interconnect nodes, watchdog, and sleep clk on QCS404
* Override Iris compatible on MSM8916-Samsung-A5U
* Enable WCNSS Wifi and bluetooth on MSM8916-Samsung-A2015
* Fixup cooling states for the aoss warming devices