Tags

This is the 3.16.76 stable release

Power management fix for 5.4-rc6

Fix a recently introduced (mostly theoretical) issue that the requests
to confine the maximum CPU frequency coming from the platform firmware
may not be taken into account if multiple CPUs are covered by one
cpufreq policy on a system with ACPI.

Second set of IIO + counter new device support, features etc for the 5.5 cycle.

Note two merge commits in here, both for immutable branches based
of 5.4-rc1.
1. Ti eqep driver because of some file moves in precursor patches.
   I suspect no one else will pull this one.
2. ab8500 refactor as changes in power supply, hwmon and mfd trees.
   This may come via numerous trees as well as IIO.

Counter subsystem related
* ti eqep
  - New device support with bindings.
  - Includes prior file move to reflect more general use of ti-pwmss.
* Counter core
  - simplify count_read and count_write callbacks + document change.
  - fix a typo in docs.

Various subsystems related
* AB8500
  - ab8500_btemp driver converted to be an IIO consumer driver.
  - ab8500_charger driver converted to be an IIO consumer driver.
  - ab8500_fg fuel gauge driver converted to be an IIO consumer driver.
  - ab8500 hwmon driver converted to be an IIO consumer driver.
  - mfd bindings augmented with the adc channels to make the above work.
  - drop original mfd driver.

New device support
* ab8500
  - new ADC driver used by the above other subystems via the IIO consumer
    interface.
* adux1020 photometric sensor
  - new driver and dt bindings.
* fxos877cq
  - new driver for this simple(ish) IMU with DT bindings.
* intel_mrfld_adc
  -  new driver for the ADC found on Intel Merrifield platforms.
* ltc2983
  - new driver for this multi-sensor type temperature interface.
    Includes complex DT bindings.
* max1027
  - support for 12 bit devices, max1227, max1229 and max1231 + add to trivial
    bindings.
* st_lsm6dsx
  - support for the LSM6DS0 6 axis MEMs sensor.
    Note different from the LSM6DSO which the driver already supports *sigh*
  - support for the LSM6DSRX 6 axis MEMs sensor.

Features and cleanups
* ad7303
  - replace use of core mlock with a local lock with cleanly defined scope.
* ad9834
  - add a check for devm_clk_get failing.
* at91-sama5d2
  - tidy up a 0 as NULL warning.
* bmp280
  - endian type tidy ups.
  - use bulk regulator ops for a small reduction in code.
  - use devm_add_action... to simplify error path handling.
* exynos
  - drop stray semicolon.
  - use devm_platform_ioremap_resource to reduce boilerplate.
* hx711
  - various tricks to improve the frequency of read out possible.
* max1027
  - debugfs support.
  - make interrupts optional.
  - reset at probe to get clean state.
  - refactors to allow addition of new device support.
* maxim thermocouple
  - drop an unneeded semicolon.
* mb1232
  - yaml binding conversion.
* mcp320x
  - tidy up an endian types in cast warning.
* meson_saradc
  - use devm_platform_ioremap_resource to reduce boilerplate.
* mpu3050
  - make a poison value explicity big endian to supress a warning.
* pulsedlight v2
  - endian type tidy ups.
* sgp30
  - drop an excess semicolon.
* sps30
  - make truncation explicit with masking to clean up a warning.
* st sensors
  - drop gpio include as none of these support gpios.
* st_lsm6dsx
  - tidy up some alignment issues.
  - refactors to allow addition of new device support.
    * allow varients of irq related reg definitions.
    * avoid accessing active-low, open-drain regs if not provided.
    * allow varients of bdu/boot and reset regs.
    * allow for enabling or disabling wakeup sources through platform
      data (seems someone still uses this).
  - enable wake-up events for LSM6DS0
  - use the drdy mask to avoid some invalid samples during initial start
    of sensor.
  - Add support to trim the timestamp.
* stm32_adc
  - kernel-doc fixes.
* stm32_dac
  - power management support.
* stmpe-adc
  - Fix endian type of local variable.
* twl4030
  - use false / true instead of 0 / 1 for booleans.
* xilinx-xadc
  - use devm_platform_ioremap_resouce to reduce boilerplate.
* zpa2326
  - reorganise buffer handling setup to be more consistent.

Fixes (mostly recent additions)
* cpcap-adc
  - Fix mising IRQF_ONESHOT that would cause warnings to be printed.
* st_lsm6dsx
  - Sanity check the read_fifo pointer is set.
  - use locked read and update functions to prevent some races.
  - avoid accessing enable_reg if not provided.
  - take a lock to prevent a race in updating the config.
  - kernel-doc fixes.
  - document wakeup-source property in dt binding.
  - fix lsm9ds1 gyro gain definitions.

Just two fixes:
 * HT operation is not allowed on channel 14 (Japan only)
 * netlink policy for nexthop attribute was wrong

sound fixes for 5.4-rc6

A copule of regression fixes and a fix for mutex deadlock at
hog-unplug, as well as other device-specific fixes:

- A commit for avoiding the spurious unsolicited interrupt on HD-
  audio bus caused a stall at shutdown, so it's reverted now.

- The recent support of AMD/Nvidia audio component binding caused
  a mutex deadlock; fixed by splitting to another mutex

- The device hot-unplug and the ALSA timer close combo may lead to
  another mutex deadlock; fixed by moving put_device() calls

- Usual device-specific small quirks for HD- and USB-audio drivers

- An old error check fix in FireWire driver

Second set of IIO fixes for the 5.4 cycle.

* adis16480
  - Prevent negative numbers being accepted for sampling frequency.
* inv_mpu6050
  - Fix an issue where fifo overflow bits don't actually work as expected,
    by checking the fifo count instead.
* srf04
  - Allow more time for echo to signal as some sensors supported have
    a higher range.
* stm32-adc
  - Fix a potential race in dma disable by ensuring all transfers are done.

drm-fixes-5.4-2019-10-30:

amdgpu:
- clang fixes
- Updated golden settings
- GPUVM fixes for navi
- Navi sdma fix
- Navi display fixes
- Freesync fix
- Gamma fix for DCN
- DP dongle detection fix
- Fix for undervolting on vega10

radeon:
- enable kexec fix for PPC

scheduler:
- set an error on fence if hw job failed

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
* Handle UP requests asynchronously in the DP MST helpers, fixing
  hotplug notifications and allowing us to implement suspend/resume
  reprobing
* Add basic suspend/resume reprobing to the DP MST helpers
* Improve locking for link address reprobing and connection status
  request handling in the DP MST helpers
* Miscellaneous refactoring in the DP MST helpers
* Add a Kconfig option to the DP MST helpers to enable tracking of
  gets/puts for topology references for debugging purposes

Driver Changes:
* nouveau: Resume hotplug interrupts earlier, so that sideband
  messages may be transmitted during resume and thus allow
  suspend/resume reprobing for DP MST to work
* nouveau: Avoid grabbing runtime PM references when handling short DP
  pulses, so that handling sideband messages in resume codepaths with the
  DP MST helpers doesn't deadlock us
* i915, nouveau, amdgpu, radeon: Use detect_ctx for probing MST
  connectors, so that we can grab the topology manager's atomic lock

Note: there's some amdgpu patches that I didn't realize were pushed
upstream already when creating this topic branch. When they fail to
apply, you can just ignore and skip them.

This is the 5.3.8 stable release

This is the 4.19.81 stable release

This is the 4.14.151 stable release

This is the 4.9.198 stable release

This is the 4.4.198 stable release

Linux 5.4-rc5

drm-next-5.5-2019-10-25:

amdgpu:
- BACO support for CI and VI asics
- Quick memory training support for navi
- MSI-X support
- RAS fixes
- Display AVI infoframe fixes
- Display ref clock fixes for renoir
- Fix number of audio endpoints in renoir
- Fix for discovery tables
- Powerplay fixes
- Documentation fixes
- Misc cleanups

radeon:
- revert a PPC fix which broke x86

ACPI fix for 5.4-rc5

Fix locking issue in the error code path of a function that belongs
to the sysfs interface exposed by the ACPI NFIT handling code (Dan
Carpenter).

Power management fixes for 5.4-rc5

 - Using device PM QoS of CPU devices for managing frequency limits
   in cpufreq does not work, so introduce frequency QoS (based on the
   original low-level PM QoS) for this purpose, switch cpufreq and
   related code over to using it and fix a race involving deferred
   updates of frequency limits on top of that (Rafael Wysocki, Sudeep
   Holla).

 - Avoid calling regulator_enable()/disable() from the OPP framework
   to avoid side-effects on boot-enabled regulators that may change their
   initial voltage due to performing initial voltage balancing without
   all restrictions from the consumers (Marek Szyprowski).

 - Avoid a kref management issue in the OPP library code and drop an
   incorrectly added lockdep_assert_held() from it (Viresh Kumar).

 - Make the recently added haltpoll cpuidle driver take the 'idle='
   override into account as appropriate (Zhenzhong Duan).

sound fixes for 5.4-rc5

This is a usual small bump in the middle, we've got a set of ASoC
fixes in this week as shown in diffstat.

The only change in the core stuff is about (somewhat minor) PCM
debugfs error handling.  The major changes are rather for Intel
SOF and topology coverage, as well as other platform (rockchip,
samsung, stm) and codec fixes.

As non-ASoC changes, a couple of new HD-audio chip fixes and a
typo correction of USB-audio driver validation code are found.

drm-fixes-5.4-2019-10-23:

amdgpu:
- Fix suspend/resume issue related to multi-media engines
- Fix memory leak in user ptr code related to hmm conversion
- Fix possible VM faults when allocating page table memory
- Fix error handling in bo list ioctl

Devicetree fixes for 5.4:

Fix a ref count, memory leak, and Risc-V cpu schema warnings.